Titanium Grade 7 Fasteners Outline
Mortec Breakdown
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja andMazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, BIS • GST, IEC andMSME
Clientele
100+ clients • India andexport markets
Export Reach
15+ countries • GCC, Africa andAmericas
Testing Offered
PMI, mechanical andchemical • MTC EN 10204 3.1 and3.2
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL andLab Report
Table of Content
PED Approved ASTM B348 Gr 7 Hex Bolt manufacturer in India with Certified Quality Assurance
Mortec Manufacturing Co forges every Titanium Grade 7 flange carefully. Each flange comes directly from traceable UNS R52400 billet stock. Every blank carries its heat number before reaching CNC lines. Grade 7 is commercially pure titanium with small palladium addition. That palladium shifts metal into passive range inside reducing acids. This result creates a flange surviving hot hydrochloric and sulphuric. Machining runs to ASME B16 5 and B16 47 standards. Precision work happens in our own modern Mumbai units daily. We offer RF and RTJ facing with smooth finish options. Custom bore drilling is available to match your exact isometric drawings. Working direct lets us skip the intermediate trading layer completely. Weld Neck Slip On Blind Socket Weld and Threaded types move. All flange types move easily from Class 150 through 2500. Every single dispatch carries PMI reports and EN mill certs.
Titanium Grade 7 Fasteners Hex Bolt Specification
Get direct quotes from the manufacturer with no middlemen—backed by original MTC packs and full mill certification.
ASTM B348 Gr 7 Head andDrive
- Hex, Heavy Hex, Socket, Allen
- Left-hand and right-hand thread
UNS R52400 Dimensional Standards
- ASME B18.2.1, B18.2.2, B18.3
- DIN 931, 933, 934, 125
- ISO 4014, 4032, 7089
Titanium Grade 7 Surface Finish
- Bright, pickled or passivated finish
- Cold-drawn, centreless-ground on request
Gr 7 Ti Fastener Testing Methods
- Tensile, Hardness, PMI
- Chemical analysis andTPI on request
UNS R52400 Service Compliance
- ASTM F467 / F468 nut andbolt compliance
- Chemical processing duty rated
Titanium Gr 7 Supporting Material
- Matching washers, nuts, gaskets
- VCI wrap andanti-tarnish export pack
Gr 7 Ti Manufacturing Route
- Forged, cold-headed or machined from bar
- Process-annealed to relieve work hardening
ASTM B348 Delivery Condition
- Descaled, sandblasted, ground or rough-turned
- Buyer specifies condition on the PO
Titanium Grade 7 Weld Filler Match
- ERTi-7 per AWS A5.16 for welded assemblies
- Argon back-purge recommended
Titanium Grade 7 Fasteners Manufacturer In India Machining From B348 Bar
Share thread size, form and quantity - our metallurgist confirms grade and delivery the same day.
Types of Titanium Grade 7 Fasteners
We are a leading Titanium Grade 7 fastener supplier in India, backed by ex-stock inventory across every common form.
Gr 7 Ti Socket Head Cap Screw
ASME B18.3 • M4-M36- Compact head for confined fixture bores
- Hex-key drive, no wrench clearance needed
UNS R52400 Ti Spring Washers
ASME B18.21.1- Maintains preload through thermal cycling
- Split andflat profiles available
Astm B348 Grade 7 Hex Bolt
ASME B18.2.1 • M6-M64- General-purpose flange andframe bolting
- Full or part-thread on request
Gr 7 Ti Threaded Rod
Full-Thread • Cut Length- Custom-cut for basket andfixture builds
- Ideal for anode andelectrode assemblies
Grade 7 Titanium Bolt
Standard andCustom Length- Available bright, pickled andpassivated
- Stocked in full and part-thread forms
Ti Alloy Grade 7 Square Bolts
Square Head • Anti-Rotation- Locks against rotation in slotted brackets
- Common on structural clamp assemblies
Titanium Alloy Gr 7 Washers
Flat andBearing Profiles- Distributes load under bolt heads andnuts
- Self-colour or passivated finish
ASTM B348 Titanium Grade 7 Studs
Continuous or Tap-End- Paired with heavy hex nuts
- Preferred for reactive-vessel joints
Gr 7 Ti Threaded Rod Chemical Composition
Being a certified Titanium Grade 7 Fasteners exporter in India, we verify this composition for buyers in Canada.
ASTM B348 Titanium Grade 7 Studs Mechanical Properties
As a Titanium Grade 7 Fasteners manufacturer in Mumbai, we machine from ASTM B348 bar. Palladium does the rest.
Titanium Grade 7 Studs Dimension Standard
Hex bolt body diameter, across-flats and head height per ASME B18.2.1, in inches.
| Diameter (D) | Body Diameter | Across the Flats (F) | Head Height (H) | |||
|---|---|---|---|---|---|---|
| Max | Min | Max | Min | Max | Min | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.850 | 0.364 | 0.302 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 0.444 | 0.378 |
| 3/4 | 0.768 | 0.729 | 1.250 | 1.212 | 0.524 | 0.455 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 0.604 | 0.531 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 0.700 | 0.591 |
| 1 1/4 | 1.277 | 1.223 | 2.000 | 1.938 | 0.876 | 0.749 |
| 1 1/2 | 1.531 | 1.470 | 2.375 | 2.300 | 1.036 | 0.902 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 1.388 | 1.175 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.750 | 1.708 | 1.479 |
Titanium Alloy Gr 7 Washers Equivalent Grades
Grade 7 / UNS R52400 maintains the same base chemistry across all global standards.
ASTM / ASME (USA)
- UNS R52400
- ASTM B348 (Bar andBillet)
- ASTM B265 (Sheet / Strip / Plate)
- AMS 4976 / AMS 4956
DIN / EN (Germany)
- Werkstoff Nr. 3.7235
- DIN 17850 (Chemical Composition)
- DIN 17862 (Bar andForgings)
GB/T (China)
- TA9
- TP340Pd
Extensive Range Of Gr 7 Ti Socket Head Cap Screw And Threaded Rod For High Corrosion Resistance
Grade 7 Titanium Bolt High-Corrosion
Grade 7 titanium fasteners-high corrosion resistance, stocked in Mumbai with MTC and PMI.
Socket Head Cap Screw
- M3 to M24 size range
- Internal hex, anti-galling
- DIN 912 / ASTM B348
Threaded Rod
- M6 to M36, up to 3m length
- Full andcontinuous thread
- UNS R56400 / ASTM B348
Corrosion Performance
- Palladium-alloyed resistance
- Seawater andchlorine service
- Outperforms Grade 2 in crevice attack
Your Titanium Grade 7 Fastener Partner In The Gulf
Ex-stock and mill-order dispatch across the Gulf—widely specified for desalination hardware.
Istanbul, Turkey
Riyadh, KSA
Abu Dhabi, UAEDubai, UAETi Alloy Grade 7 Square Bolts Corrosion Service Limit
Palladium significantly boosts crevice-corrosion resistance—making Grade 7 essential for reducing-acid duty.
Not Sure The Grade You Paid For Is What Landed?
Every heat ships with EN 10204 3.1 documentation - ask for 3.2 third-party witnessed on request.
Titanium Grade 7 Bolts vs Grade 2 Fasteners Difference
As a leading titanium grade 7 bolts manufacturer in India, we help United States buyers choose the right grade.
Titanium Grade 2 (R50400)
- Alloying: Unalloyed CP-Ti, no Pd
- Crevice Corrosion: Good in oxidizing chlorides
- Reducing Acid Duty: Limited, pitting risk above ~60°C
- Relative Cost: Lower
Titanium Grade 7 (R52400)
- Alloying: CP-Ti + 0.12-0.25% Pd
- Crevice Corrosion: Best-in-class, oxidizing andreducing
- Reducing Acid Duty: Stable to 260°C in dilute acids/chlorides
- Relative Cost: Higher (palladium premium)
Titanium Grade 7 Fasteners, Ex-Stock Across Africa
Container-ready shipments for mining and mineral-processing buyers across Southern and East Africa.
Durban, SA
Kampala, UgandaJohannesburg, SAUNS R52400 Ti Spring Washers Anti-Galling Finish
As your Titanium Grade 7 Fasteners supplier in Mumbai, we flag this early. Titanium threads gall on assembly, so pick a finish below.
Astm B348 Grade 7 Hex Bolt HS Code
Use this classification for customs entry - Titanium Grade 7 Fasteners supplier in India for smooth clearance at any port.
From Toronto To Manila - Titanium Grade 7 Fasteners On Demand
Ex-stock supply lines serving North American plant maintenance and Southeast Asian process buyers alike.
VietnamHouston, USA
Malaysia
Toronto, Canada
Mexico
SingaporeGr 7 Ti Socket Head Cap Screw Applications
Key industries rely on Grade 7 fasteners—and buyers pan-India trust us for fast UNS R52400 dispatch.
Titanium Grade 7 Fasteners Exporter In India Backing KwaZulu Natal Projects
Container and air-freight consignments move with complete BIS and mill documentation attached.
Titanium Grade 7 Fasteners Delivery Timeline
As your Titanium Grade 7 Fasteners supplier in India, we keep this schedule for Netherlands-bound orders.
Same-Week Ex-Stock Packing
Ready inventory bolts and studs are boxed and out our gate within 2-5 working days.
Sea Freight
Most economical route to your port, typically 1-4 weeks transit depending on destination.
Air Freight
Door-to-door in 3-7 days when a shutdown or breakdown can't wait for a vessel.
Country-Specific ETA
Tell us your port and Incoterm and we'll confirm a locked delivery date.
Titanium Grade 7 Fasteners Across the Americas andSoutheast Asia
Ex-stock supply lines serving Latin American plant maintenance and Southeast Asian process buyers.
Bangkok, Thailand
Jakarta, Indonesia
Caracas, Venezuela
Manila, PhilippinesMexico City, MexicoUNS R52400 Ti Spring Washers Testing andCertification
As a Titanium Grade 7 Fasteners exporter in Mumbai, we record every test on your mill certificate. Copies on request.
Titanium Grade 7 Fasteners Supplied Across Europe
Ex-stock and mill-order dispatch to European process, marine and desalination equipment buyers.
Hamburg, Germany
Rotterdam, Netherlands
Milan, Italy
London, UKTitanium Grade 7 Fastener Supply References
A sample of recent dispatches across our Middle East, Africa and Americas customer base.
M16 Titanium Grade 7 Stud Bolts - Desalination Membrane Skid
With heavy hex nuts, PMI verified, EN 10204 3.1 MTC.
Desalination EPC Contractor, UAE
DUBAI, UAEM12 Titanium Grade 7 Hex Bolts - Gold Leach Tank Fittings
Bright finish, third-party witnessed, full traceability.
Mineral Processing Contractor, South Africa
JOHANNESBURG, SOUTH AFRICAM8 Gr 7 Ti Socket Head Cap Screws - Heat Exchanger Baffle Set
PTFE coated threads, PMI tested, EN 10204 3.1 MTC.
Pulp andPaper Equipment Fabricator, Canada
TORONTO, CANADAM20 UNS R52400 Threaded Rod - Scrubber Duct Retrofit
Full-thread, custom cut length, EN 10204 3.1 MTC.
Power Plant Contractor, Kenya
NAIROBI, KENYAM10 Titanium Grade 7 Hex Nuts andWashers - Chemical Injection Line
Pickled andpassivated, chemical report included.
Chemical Processing Contractor, Singapore
SINGAPOREM6 Ti Alloy Grade 7 Allen Cap Screws - Offshore Sensor Housing
Hardness tested, MTC 3.2 third-party witnessed.
Offshore Equipment Contractor, USA
HOUSTON, TEXAS, USATitanium Grade 7 Fasteners Supplier In India Shipping Heat Traced Lots
Every batch ships PMI-checked and heat-traceable, ready for your site inspection team.
Titanium Grade 7 Fastener FAQs
Quick answers to top buyer questions, proudly manufacturing Titanium Grade 7 fasteners in India with full in-house production.
What is the price basis for UNS R52400 Ti Spring Washers?
- Priced per kg on titanium sponge and palladium cost
- Titanium Alloy Gr 7 Washers follow the same rate basis
- Size, form and testing level move the number, so share your drawing
What is the maximum service temperature for Gr 7 Ti Threaded Rod in corrosive duty?
- Resists crevice corrosion in reducing acids and chlorides up to 260°C (500°F)
- Well above unalloyed Grade 2 titanium
- A Ti Alloy Grade 7 Socket Cap Screw holds the same limit under its palladium stabilised oxide film
Do you supply ASTM B348 Titanium Grade 7 Studs to Africa, the Middle East and Canada?
- Yes, as manufacturer and stockholder
- Titanium Grade 7 Hex Bolt and Ti Alloy Grade 7 Square Bolts ship to GCC, Africa, Europe and North America
- Full export documentation travels with every consignment
What is the difference between Titanium Grade 7 and Grade 2 fasteners?
- Grade 7 adds 0.12 to 0.25% palladium
- Titanium Grade 7 Fasteners resist crevice corrosion in reducing acids far better
- Grade 2 is unalloyed and more economical for general oxidizing service
What forms are available in Grade 7 Titanium Bolt?
- Astm B348 Grade 7 Hex Bolt, stud bolts and threaded rod
- Heavy hex and hex nuts for every titanium grade 7 bolts order
- Gr 7 Ti Socket Head Cap Screw and Allen cap screws
- Spring washers, ex stock M6 to M64
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
