Titanium Grade 5 Fasteners Quick Spec Overview
Mortec At A Glance
Established
Since 2012 • 14 yrs in alloy fastening
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015 • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
19+ countries • GCC, Africa & Americas
Testing Offered
Wedge-tensile, chemical & PMI • MTC EN 10204 3.1
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
Manufacturer of Ti-6Al-4V Alloy Nuts and Bolts in India with Off-the-Shelf Availability
When a project calls for the highest strength to weight ratio in fastening hardware, buyers across South Africa, the UAE, Kenya and Canada come to us as their preferred Titanium Grade 5 fastener manufacturer. Our ex-stock inventory spans M3 to M56 and 1/8″ to 2″ UNC/UNF, and it's where most buyers find their ASME SF 468 UNS R56400 bolts and Ti alloy grade 5 stud bolts already sitting on the rack, so an order leaves our Mumbai works within 24 to 72 hours instead of waiting on a fresh mill run.
Every Ti 6Al-4V bolt we ship, right down to the ASTM B348 UNS R56400 nuts and Gr 5 titanium heavy hex nuts that go with them, arrives with wedge tensile mill test certification, anti galling finish guidance and export ready packing built for long haul freight. As a dedicated Titanium Grade 5 fastener exporter, we machine direct from bar stock with no trader layers in between, so pricing stays sharp and lead times stay short. Whether it's a handful of prototype bolts or a container-load order, our grade desk confirms head style, thread and finish before you commit, so you order with confidence, not guesswork.
Titanium Grade 5 Fasteners Specification
As an established Titanium Grade 5 fastener exporter shipping worldwide, send your size list and we'll turn around a quick quote.
Titanium Grade 5 Bolts Size & Thread Range
- M3 to M56 metric coarse & fine
- 1/8″ to 2″ UNC/UNF
ASTM F468 UNS R56400 Bolt Head & Drive Types
- Hex, Socket, Button, Countersunk
- Slotted, Torx & Allen drive
UNS R56400 Bolt Governing Standards
- ASTM F468 (Bolts, Screws, Studs)
- ASTM F467 (Nuts) / UNS R56400
Ti 6 Al-4V Bolts Dimensional Standards
- ASME B18.2.1 & B18.2.2
- ISO 4014, 4017 & 4032
Titanium Grade 5 Fastener Surface Finish
- Bright machined, passivated
- Colour anodised, DLC coated on request
Ti Alloy Grade 5 Stud Bolts Testing & Documentation
- Wedge-Tensile, PMI, Hardness
- MTC EN 10204 3.1, TPI on request
DIN 3.7165 Threaded Rod Corrosion Compliance
- Seawater & chloride resistant
- Non-magnetic, biocompatible grade
Titanium Alloy 5 Washers Supporting Material
- Flat & spring washers, lock nuts
- Anti-galling anti-seize on request
Gr 5 Titanium Heavy Hex Nut Manufacturing Origin
- Indian, European, US mills
- Origin certificate on request
Titanium Gr 5 Hex Cap Screws Manufacturing Standards
Before dispatch, we check every fastener's dimensions against these governing codes.
Stock Assured ASTM B348 UNS R56400 Washers and Screws With Size Ranging From M3 to M56 for critical applications
UNS R56400 Bolt Applications
As a Titanium Grade 5 Fasteners Manufacturer in Mumbai, we've earned trust across aerospace, marine, medical and motorsport work.
ASTM F468 UNS R56400 Fastener Types
With ex-stock inventory across every common head style, we're a leading Titanium Grade 5 fasteners supplier in India.
Titanium Grade 5 Hex Cap Screw
ASTM F468 • M3–M56- Full or partial thread
- Most-ordered structural fastener
Titanium Grade 5 Heavy Hex Nut
ASTM F467 • M6–M56- Wider bearing face for high load
- Matched to F468 bolt threads
Titanium Alloy 5 Flat Washer
ASME B18.22.1 • All Sizes- Spreads clamp load, prevents galling
- Plain or spring-lock type
Ti Alloy Grade 5 Stud Bolt
ASTM F468 • Custom Length- Double-end or continuous thread
- Used with two heavy hex nuts
Titanium Grade 5 Socket Head Cap Screw
ASME B18.3 • M3–M36- Allen-key drive, low profile head
- Common in aerospace & motorsport
UNS R56400 Eye Bolt
DIN 580 • M6–M48- Lightweight lifting & rigging points
- Non-sparking, corrosion resistant
DIN 3.7165 Threaded Rod
Cut Length • M3–M56- Continuous thread, cut to size
- Ideal for anchor & tie-rod duty
Ti Alloy Grade 5 Flange Bolt
Serrated Head • M6–M24- Integral washer, no loose part
- Vibration-resistant seating
Titanium Grade 5 Countersunk Flat Head Screw
ASME B18.6.7 • M3–M20- Flush-seating for aerodynamic skins
- Preferred in aerospace panel fixing
Titanium Grade 5 Fasteners Manufacturer In Mumbai Since 2012
Share your size list and head style, and we'll quote both ex stock and mill order lead times the same day.
Alloy Gr.5 Hex Nuts Chemical Composition
Every heat we certify for Ti-6Al-4V chemistry meets ASTM B348 composition limits, backed by our standing as a trusted Titanium Grade 5 Fasteners Manufacturer in India.
UNS R56400 Eye Bolts Mechanical Properties
Every batch we dispatch carries verified tensile, yield and elongation values, backing our credentials as a Titanium Grade 5 Fasteners Supplier in India.
Ti Alloy Grade 5 Flange Bolts Equivalent Grades
Six major fastener standards recognize Ti-6Al-4V or UNS R56400 under a matching designation, all sharing identical core chemistry.
ASTM / ASME (USA)
- UNS R56400
- ASTM F468 (Bolts, Screws, Studs)
- ASTM F467 (Nuts)
- AMS 4967 / MIL-T-9047
DIN / EN (Germany)
- Werkstoff 3.7165
- TiAl6V4
- DIN 931 / 933 (Form)
JIS (Japan)
- TAB6400
- Follows JIS B1180 (Bolt Form)
BS (United Kingdom)
- BS TA11
- Follows EN ISO 4014/4032 (Form)
GOST (Russia)
- ВТ6 (BT6)
GB/T (China)
- TC4
Ti-6Al-4V Alloy Nuts and Bolts: Your Partner Across Africa and the Gulf
We prepare container-ready shipments for buyers across Southern Africa and the GCC.
Johannesburg, SA
Nairobi & Mombasa, Kenya
Kampala, Uganda
Dubai & Abu Dhabi, UAE
Jubail, Saudi Arabia
Istanbul, TurkeyNeed Mill-Test-Certified Titanium Grade 5 Fasteners?
Every order ships with EN 10204 3.1 documentation and full heat-lot traceability, no extra cost involved.
Titanium R56400 Stud Bolts Metric & Size Chart
Our full diameter and length range stays ready against your bolting schedule, as an established Titanium Grade 5 Fasteners Exporter.
| Nominal Size | Coarse Pitch | Nominal Size | Coarse Pitch |
|---|---|---|---|
| M3 | 0.50 | M20 | 2.50 |
| M4 | 0.70 | M24 | 3.00 |
| M5 | 0.80 | M30 | 3.50 |
| M6 | 1.00 | M36 | 4.00 |
| M8 | 1.25 | M42 | 4.50 |
| M10 | 1.50 | M48 | 5.00 |
| M12 | 1.75 | M56 | 5.50 |
| M16 | 2.00 | — | — |
Expanding Ti-6Al-4V Alloy Nuts and Bolts Supply Into Caucasus and Central Asia
We're building out delivery routes to energy projects across the Caucasus and Central Asia.
Armenia
AzerbaijanTitanium Grade 5 Bolt Torque & Installation Guidance
Every order of ASTM F467 UNS R56400 Nuts comes with size specific torque and installation guidance to get proper preload.
Stainless Steel 316 Fasteners Vs Titanium Grade 5 Fasteners
Thinking of moving off 316 stainless. Talk to our Titanium Grade 5 fastener manufacturer in India grade desk first to see what actually changes.
Stainless Steel 316 Fasteners
- Density: 8.0 g/cc – heavier hardware
- Galling Risk: High in like-on-like threads
- Magnetic: Weakly to non-magnetic (austenitic)
- Relative Cost: Lower
Titanium Grade 5 Fasteners
- Density: 4.43 g/cc – under half the weight
- Galling Risk: Manageable with lubrication
- Magnetic: Fully non-magnetic
- Relative Cost: Higher, offset by weight savings
Ex Stock Ti-6Al-4V Alloy Nuts and Bolts Ready To Ship Across Africa
Full container loads go out packed and ready for buyers across North, West, East and Southern Africa.
Addis AbabaJohannesburg, SA
Dakar, Senegal
Cairo, Egypt
Algeria
Victoria, Seychelles
Casablanca & Tangier
Lagos, NigeriaTitanium Grade 5 Fasteners Price Factors
Get accurate pricing on your specs from us, a trusted Titanium Grade 5 Fasteners Supplier in India.
Ti-6Al-4V Fastener Exporter In India To Jebel Ali, UAE
Weekly consolidations run to the UAE and the wider GCC, ask us about your nearest sailing date.
Growing Our ASTM B348 UNS R56400 Washers and Screws Supply Across North America and ASEAN
We're growing supply lines to reach buyers across Canada, Southeast Asia and the wider Pacific rim.
Toronto, CanadaUnited States
Mexico
Thailand
Malaysia
Philippines
Vietnam
IndonesiaReady To Order Ex-Stock Titanium Grade 5 Fasteners?
We'll turn around piece count pricing for South Africa, the Gulf or Canada within one business day.
ASTM B348 UNS R56400 Washers and Screws Available On Demand From Houston To Buenos Aires
Our ex stock supply lines reach both Gulf Coast fabricators and Latin American buyers alike.
ArgentinaTulsa, USA
BrazilHouston, USAMexicoChicago, USABaton Rouge, USATi 6 Al-4V Bolts Manufacturing Process
We machine and heat treat Titanium Grade 5 Screws in house for consistent strength and finish.
Bar Cutting
Ti-6Al-4V round bar sawn to blank length per size.
Turning & Heading
CNC turning forms the head, shank and chamfer.
Thread Rolling / Cutting
Threads formed to ASME B18.2.1 tolerance class.
Test & Mark
Wedge-tensile, PMI and dimensional check before heat-lot marking.
Ti Alloy Grade 5 Stud Bolts Delivery Timeline
Payment confirmation triggers quick dispatch from our Mumbai facility. Select shipping below, since transit duration varies per destination port.
Ready Stock Dispatch
Standard bolt, nut and washer sizes ship within 24–72 hours of order confirmation
Sea Freight (FCL/LCL)
Most economical route to your port, typically 10–30 days transit
Air Freight (Urgent)
For breakdown or shutdown orders, air cargo lands in 3–6 days
Landed ETA By Country
Tell us your destination country for a firm delivery date
DIN 3.7165 Threaded Rod Testing & Certification
Our dedicated Titanium Grade 5 Fastener Exporter team logs every requested inspection directly onto your mill test certificate.
Middle East and GCC Supply Partner for ASTM B348 UNS R56400 Washers and Screws
As the go to Titanium Grade 5 fasteners exporter for the Gulf, Africa and Americas, our inventory stays prepared for quick turnaround.
Muscat, OmanDubai, UAEDammam, KSA
Manama, BahrainAbu Dhabi, UAE
Kuwait City
Doha, QatarRiyadh, KSATitanium Alloy 5 Washers Supply References
Our export network recently moved consignments to destinations spanning the African, Gulf and North American markets.
M10 Titanium Grade 5 Hex Cap Screws - Airframe MRO Batch
ASTM F468, wedge-tensile tested, EN 10204 3.1 MTC.
Aerospace MRO Contractor, Canada
TORONTO, CANADAM16 Ti-6Al-4V Stud Bolts - Offshore Platform Handrail Package
Heavy hex nuts to F467, PMI tested, third-party witnessed.
Offshore EPC Contractor, UAE
ABU DHABI, UAEM8 Titanium Grade 5 Socket Head Cap Screws - Pump Skid Rebuild
DLC coated, anti-galling anti-seize supplied, full traceability.
Mining Equipment Contractor, South Africa
JOHANNESBURG, SOUTH AFRICAM12 Titanium Grade 5 Flange Bolts - Desalination Pipe Rack
Serrated flange head, chemical analysis certified.
Utility Contractor, Kenya
MOMBASA, KENYAM6 Titanium Grade 5 Button Head Screws - Motorsport Chassis Kit
Anodised finish, batch-tested, hand-picked and packed.
Race Team Fabricator, Thailand
BANGKOK, THAILANDM4 Titanium Grade 5 Threaded Rod - Medical Fixture Tooling
Cut-to-length, passivated finish, MTC 3.1 supplied.
Medical Device Contractor, Germany
HAMBURG, GERMANYTop Export Countries
UAE
Saudi Arabia
South Africa
Kenya
Uganda
Canada
United Kingdom
Turkey
Singapore
Thailand
Italy
Netherlands
Philippines
Malaysia
Indonesia
ASTM F468 Titanium Fastener Supplier In Ahmedabad With Full MTC
Every batch we release carries EN 10204 3.1 paperwork ready for your QA file.
Titanium Grade 5 Fasteners FAQs
As a leading Titanium Grade 5 fastener manufacturer in India, here's what customers frequently want clarified.
What sizes are available in Ti 6 Al-4V Bolts and Titanium Gr 5 Hex Cap Screws?
We hold M3 to M56 metric and 1/8″ to 2″ UNC/UNF coarse and fine thread in bolts, studs, nuts, washers and screws.
What is the price basis for ASME SF 468 UNS R56400 Bolt?
Price is quoted per piece or per kg against the day’s titanium sponge/scrap index, plus size, head style and testing level - share your spec for a firm number.
Are Ti Alloy Grade 5 Stud Bolts and Ti Alloy Grade 5 Flange Bolts available in metric sizes?
Yes - metric M3 to M56 coarse pitch is stocked alongside imperial UNC/UNF 1/8″ to 2″ on the same production line.
What torque should be used for Gr 5 Titanium Heavy Hex Nut and Alloy Gr.5 Hex Nuts?
There's no single torque figure, it depends on bolt diameter, lubrication and target preload. We supply a size-specific torque note with every order instead of a generic table.
Do you export UNS R56400 Bolt and UNS R56400 Eye Bolts to Africa and the Middle East?
Yes - we ship as manufacturer and stockholder to ports across the GCC, Africa, Americas and APAC with full export documentation.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
