Titanium Grade 2 Flanges

Get ASTM B381 UNS R50400 Blind Flange Manufacturer In India With Genuine Material At Factory-Direct Pricing

Mortec Manufacturing Co is an established Titanium Grade 2 Flanges Manufacturer in India. We machine every ASTM B381 Grade F-2 flange from certified titanium stock. All work happens at our own Mumbai facility. Each blank is heat-numbered before CNC turning begins. Stress-relief and mill annealing restore the single-phase alpha structure. This locks in the grade's signature weld-friendly ductility. It resists chlorides, seawater and oxidizing acids reliably. We also manufacture Grade 2 Titanium Slip On Flange and CP 2 Ti Plate Flanges.

Machining follows ASME B16.5 dimensions completed fully in-house. We offer RF or FF facing in smooth or serrated finish. Custom bore drilling is done as per your isometric. As a direct Titanium Grade 2 Flanges Supplier in India, we hold stock. We also supply Titanium Alloy Gr 2 Weld Neck Flange and Ti Metal Gr 2 Blind Flange. Weld Neck, Slip-On, Blind, Socket Weld and Threaded types are ex-stock. Sizes are held in Class 150 and 300 only. Dispatch happens within three to five days. Every order includes PMI reports and hydrostatic test records. We also provide EN 10204 3.1 or 3.2 mill test certificates.

Get your Titanium Grade 2 Flanges quote from the machine shop floor with MTC and NACE paperwork bundled.

Frequently ordered Titanium Grade 2 flange sizes stay ex-stock in Class 150 and 300.

Titanium's 4.51 g/cm³ density is about 57% of forged carbon steel, so a Titanium Grade 2 flange in the same size.

Every Titanium Grade 2 flange moves through six controlled stages before it reaches the packing bay.

Ex-stock Titanium Grade 2 inventory and mill-order dispatch reach buyers across all these countries and beyond.

Export Markets

UAE

Turkey

Canada

UK

Saudi Arabia

Singapore

USA

Mexico

Thailand

Italy

Netherlands

Germany

Philippines

Malaysia

Uganda

Indonesia

South Africa

Vietnam

Venezuela

Every Titanium Grade 2 flange dispatch carries the paperwork your inspector or customs desk will ask for.

Titanium Grade 2 flange face finish is matched to gasket type and service, confirmed at RFQ stage.

Starting torque for lubricated ASTM A193 Grade B7 studs on a spiral-wound gasket.

Titanium Grade 2 ships mill-annealed; it skips steel's quench-and-temper strengthening treatment entirely.

Each production lot is checked against ASTM B381 acceptance criteria before it is released for dispatch.

Titanium Grade 2 Flanges Manufacturer in India producing Threaded, Lap Joint and Orifice types alongside the standard range.

ASTM B381 R50400 Weld Neck Flange

ASME B16.5 • ½″–24″

• Tapered hub, full penetration weld
• Best for cyclic / high-pressure lines

B381 UNS R50400 Slip-On Flange

ASME B16.5 • Class 150–300

• Fast-fit, lower fabrication cost
• Suited to low-pressure service

Titanium Grade 2 Blind Flange

ASME B16.5 • Class 150 & 300

• Seals pipe ends & vessel nozzles
• No bore machining required

WNR 3.7035 Socket Weld Flange

ASME B16.5 • ≤4″ NB

• Bore-fit socket, single fillet weld
• Good for small high-pressure lines

ASTM B381 UNS R50400 Threaded Flange

ASME B16.5 • ≤4″ NB

• Weld-free, bolted assembly
• Preferred in hazardous-area work

Commercially Pure Ti Gr 2 Lap Joint Flange

ASME B16.5 • With Stub End

• Free rotation for bolt alignment
• Titanium stub, steel back ring option

Ti Grade 2 Orifice Flange

AGA-3 • Class 150–300

• Jack-screw tapped for meter runs
• Used for custody-transfer flow metering

Titanium Alloy Gr 2 Long Neck Flange

MSS SP-44 • Extended Hub

• Extended hub for tank/vessel nozzles
• Reduces separate nozzle fabrication

Commercially pure titanium chemistry gives Grade 2 its single-phase alpha structure.

ASTM B381 sets minimum room-temperature properties for annealed Grade F-2 forgings.

Titanium Grade 2 carries an equivalent designation in every major piping standard.

Buyers often weigh commercially pure Grade 2 against alloyed Grade 5 before finalising a purchase order.

Titanium Grade 2 features a stable, protective oxide film. It resists chlorides across UAE, South Africa, and Kenya.

Correct classification keeps your shipment moving smoothly through customs without delay.

Geothermal brine corrodes steel quickly; Kenyan plants choose Titanium Grade 2 instead.

These are the industries that specify Titanium Grade 2 flanges most often, and why.

Confirm your size, class and finish against ex-stock inventory, and here is the lead time you can plan around.

Quick answers to the questions buyers ask us most before placing an order.