Stainless Steel 410 Flanges Aspects
Mortec At A Glance
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, PED • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
15+ countries • GCC, Africa & APAC
Testing Offered
Tensile, hardness & PMI • MTC EN 10204 3.1
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
Leak-proof SS 410 Lap Joint Flanges Manufacturer in India in Custom Sizes
Mortec Manufacturing Co works as a direct Stainless Steel 410 Flanges Manufacturer in India. We closed-die forge ASTM A182 F6a blanks from heat-numbered UNS S41000 bar. All forging takes place inside our own Mumbai manufacturing units. Because 410 is martensitic chromium steel, heat treatment determines performance. Each lot receives Class 1 annealed or Class 2 treatment. Class 2 material is hardened and tempered before CNC machining. Actual measured hardness appears on certificates rather than copied templates.
Finish machining follows ASME B16.5, B16.47 Series A and B, or MSS. We manufacture Lap Joint Flanges with accurate stub-end mating radii. Available types include weld neck, blind, slip-on, socket weld, and orifice. Plate, reducing, and spectacle blind flanges are also manufactured. Standard pressure classes range from Class 150 through Class 2500. Custom bores, drilling, and outside diameters follow your approved isometric. Every Mumbai dispatch includes PMI readings and detailed hardness reports. EN 10204 3.1 or 3.2 certificates accompany every shipment file.
Stainless Steel 410 Flanges Specification
Everything below is confirmed in writing on your order acknowledgement before the first billet is cut.
SS 410 Flanges Delivery Condition
- Class 1 – annealed
- Class 2 – hardened & tempered
AISI 410 Flanges Dimensional Standards
- ASME B16.5
- ASME B16.47 Series A & B
- MSS SP-44
SS F410 Slip On Flanges Testing Scope
- Hardness, tensile, PMI, DP
- Charpy impact on written request
410 SS Orifice Flanges Third-Party Inspection
- TUV, BV, SGS, Lloyd’s witness
- Client stage inspection welcome
Steel 410 Industrial Flanges Surface Treatment
- Pickled, passivated, shot blasted
- Buffed or oiled anti-rust coat
SUS F410 Pipe Flanges Thread & Bore
- NPT, BSPT, BSPP threading
- Counter-bore to your pipe schedule
ASTM A182 Stainless Steel 410 Plate Flanges Packaging
- Stud bolts, nuts, gaskets bundled
- Seaworthy plywood cases, VCI wrap
INOX 410 Long Weld Neck Flanges Raw Material Source
- Bars to ASTM A276 / A479 Type 410
- Heat number carried to the boxed part
Werkstoff No 1.4006 Stainless Steel Reducing Flanges Quality Systems
- ISO 9001:2015 certified plant
- PED 2014/68/EU documentation route
Size Chart of SS 410 Lap Joint Flanges
Class 150 SS 410 Lap Joint Flange sizes follow ASME B16.5, shown in millimetres.
| Nom. Pipe Size | o | T1 | R | x | No.2/Dia. of Holes | Bolt Circle Dia. | L21 | H | B23 | L | B | r | L34 | B3 | D |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | 3.50 | 0.44 | 1.38 | 1.19 | 4-0.62 | 2.38 | 1.88 | 0.84 | 0.62 | 0.62 | 0.88 | 0.12 | 0.62 | 0.90 | 0.38 |
| 1 | 4.25 | 0.56 | 2.00 | 1.94 | 4-0.62 | 3.12 | 2.19 | 1.32 | 1.05 | 0.69 | 1.36 | 0.12 | 0.69 | 1.38 | 0.50 |
| 8 | 13.50 | 1.12 | 10.62 | 9.69 | 8-0.88 | 11.75 | 4.00 | 8.63 | 7.98 | 1.75 | 8.72 | 0.50 | 1.75 | 8.75 | 1.25 |
| 1-1/2 | 5.00 | 0.68 | 2.88 | 2.56 | 4-0.62 | 3.88 | 2.44 | 1.90 | 1.61 | 0.88 | 1.95 | 0.25 | 0.88 | 1.97 | 0.62 |
| 2 | 6.00 | 0.75 | 3.62 | 3.06 | 4-0.75 | 4.75 | 2.50 | 2.38 | 2.07 | 1.00 | 2.44 | 0.31 | 1.00 | 2.46 | 0.69 |
| 2-1/2 | 7.00 | 0.88 | 4.12 | 3.56 | 4-0.75 | 5.50 | 2.75 | 2.88 | 2.47 | 1.12 | 2.94 | 0.31 | 1.12 | 2.97 | 0.75 |
| 4 | 9.00 | 0.94 | 6.19 | 5.31 | 8-0.75 | 7.50 | 3.00 | 4.50 | 4.03 | 1.31 | 4.57 | 0.44 | 1.31 | 4.60 | 0.94 |
| 3/4 | 3.88 | 0.50 | 1.69 | 1.50 | 4-0.62 | 2.75 | 2.06 | 1.05 | 0.82 | 0.62 | 1.09 | 0.12 | 0.62 | 1.11 | 0.44 |
| 5 | 10.00 | 0.94 | 7.31 | 6.44 | 8-0.88 | 8.50 | 3.50 | 5.56 | 5.05 | 1.44 | 5.66 | 0.44 | 1.44 | 5.69 | 0.94 |
| 1-1/4 | 4.62 | 0.62 | 2.50 | 2.31 | 4-0.62 | 3.50 | 2.25 | 1.66 | 1.38 | 0.81 | 1.70 | 0.19 | 0.81 | 1.72 | 0.56 |
| 6 | 11.00 | 1.00 | 8.50 | 7.56 | 8-0.88 | 9.50 | 3.50 | 6.63 | 6.07 | 1.56 | 6.72 | 0.50 | 1.56 | 6.75 | 1.06 |
| 3-1/2 | 8.50 | 0.94 | 5.50 | 4.81 | 8-0.75 | 7.00 | 2.81 | 4.00 | 3.55 | 1.25 | 4.07 | 0.38 | 1.25 | 4.10 | 0.88 |
| 10 | 16.00 | 1.19 | 12.75 | 12.00 | 12-1.00 | 14.25 | 4.00 | 10.75 | 10.02 | 1.94 | 10.88 | 0.50 | 1.94 | 10.92 | 1.31 |
| 3 | 7.50 | 0.94 | 5.00 | 4.25 | 4-0.75 | 6.00 | 2.75 | 3.50 | 3.07 | 1.19 | 3.57 | 0.38 | 1.19 | 3.60 | 0.81 |
| 12 | 19.00 | 1.25 | 15.00 | 14.38 | 12-1.00 | 17.00 | 4.50 | 12.75 | 12.00 | 2.19 | 12.88 | 0.50 | 2.19 | 12.92 | 1.56 |
Popular Types of SS 410 Flanges
Stainless Steel 410 Flanges Supplier in India providing standard sizes and thread types with ready stock availability.
SS 410 Lap Joint Flanges
ASME B16.5 • With Stub End- Backing ring turns freely for bolt-up
- Suits lines opened often for cleaning
INOX 410 Long Weld Neck Flanges
MSS SP-44 • Vessel Nozzles- Extended barrel forms the nozzle neck
- Bore matched to your vessel drawing
Stainless Steel F410 Blind Flanges
ASME B16.5 • All Classes- Solid disc, no bore to machine
- Caps future tie-in points on skids
410 SS Orifice Flanges
Jack Screws • Class 300–900- Tapped pressure taps for meter runs
- Supplied as a matched pair set
SUS F410 Pipe Flanges
ASME B16.5 • ½″–24″- Tapered hub butt weld neck pattern
- Chosen for cyclic and pulsating duty
ASTM A182 Stainless Steel 410 Plate Flanges
Flat Face • Low Pressure- Plain flat ring, economical section
- Common on tank and utility headers
410 SS Orifice Flanges For America & Southeast Asia
Regular shipments serve both North American distributors and Southeast Asian assembly plants.
Toronto, Canada
Chicago, USA
Monterrey, Mexico
Venezuela
Singapore
Cebu, Philippines
Penang, Malaysia
Vietnam
Thailand
Indonesia
Genoa, Italy
Rotterdam, NetherlandsStainless Steel 410 Flanges Manufacturer In Mumbai - Forging Since 2012
Send your NPS, class and facing list and our desk replies with a same-day ex-Mumbai price.
AISI 410 Flanges Chemical Composition
Mechanical Properties of UNS S41000 Stainless Steel Spectacle Blind Flanges
Werkstoff No 1.4006 Stainless Steel Reducing Flanges Equivalent
ASTM / ASME (USA)
- UNS S41000
- ASTM A182 F6a / ASME SA182 F6a
- AISI / SAE Type 410
- ASTM A276 / A479 Type 410 (Bar)
DIN / EN (Germany)
- Werkstoff No 1.4006
- EN X12Cr13
- EN 10088-3 (Bar & Semi-Finished)
JIS (Japan)
- SUS 410
- SUS F410 (Forgings)
BS (United Kingdom)
- 410S21
- BS EN 10088-3 X12Cr13
AFNOR (France)
- Z13C13
- NF EN 10088-3
Common Trade Names
- INOX 410 / SS 410
- 12Cr Martensitic Stainless
Welding Process of SS F410 Slip On Flanges
Controlled preheating, suitable filler selection and post-weld tempering help prevent cracking and maintain properties.
Confirm 410 Suits Duty
Specify A182 F6a Class
Preheat 200–315 °C
Select Suitable Filler
Post-Weld Tempering
Hardness Verification
Final Inspection
Stainless Steel 410 Vs 316 Flanges
The two grades solve different problems – hardness, chloride resistance and weldability. Pick against your service.
Stainless Steel 410 (S41000)
- Structure: Martensitic, magnetic
- Chromium: 11.5–13.5%, no molybdenum
- Key Trait: Hardenable by heat treatment
- Best For: Wear, mild corrosion, steam and refinery duty
Stainless Steel 316 (S31600)
- Structure: Austenitic, essentially non-magnetic
- Chromium: 16–18% with 2–3% molybdenum
- Key Trait: Not hardenable by heat treatment
- Best For: Chloride, marine and acid process lines
SS F410 Slip On Flanges Exporter - Regular Sailings To Jebel Ali & Khalifa Port
Crated, marked and documented so your UAE clearing agent files without a single query.
High-pressure Rated INOX 410 Long Weld Neck and Blind Flanges For Oil And Gas Refineries
Pressure Rating of INOX 410 Long Weld Neck Flanges
Class 150 SS 410 Lap Joint Flange sizes follow ASME B16.5, shown in millimetres.
| Temp.℃ | Pressure- temperature rating for B16.47 by class, bar | |||||
|---|---|---|---|---|---|---|
| 75 | 150 | 300 | 400 | 600 | 900 | |
| 250 | 6.0 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 |
| -29 to 38 | 10.0 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 |
| 150 | 7.9 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 |
| 200 | 6.9 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 |
| 100 | 8.8 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 |
| 50 | 9.8 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 |
| 300 | 5.1 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 |
ASTM A182 Stainless Steel 410 Plate Flanges Applications
Sectors where 410 is written into the piping class rather than substituted at site.
410 SS Socket Weld Flanges Manufacturing Process
Eight controlled stages completed inside our Mumbai manufacturing units.
01 Bar Inward
Mill certificate checked • Heat number logged
02 Billet Cutting
Cut to weight • Heat marking retained
03 Heating & Forging
Controlled heating • Closed-die forging
04 Ring Forming
Required ring dimensions • Seamless section
05 Heat Treatment
Annealed or hardened • Batch recorded
06 CNC Machining
Face and bore • Drilling to standard
07 Inspection
PMI and hardness • Dimensional verification
08 Marking & Packing
Heat number marked • Export-ready packing
From Kenya To South Africa - AISI 410 Flanges, Ready to Ship.
Reliable Stainless Steel 410 Flanges Exporter supplying worldwide with complete material documentation.
Johannesburg, SADurban, SA
Nairobi, KenyaMombasa, Kenya
Kampala, UgandaASTM A182 F6a Flange Supplier In Toronto - CRN Data Sheet Support
Certified 410 forgings backed by the material data your provincial submission asks for.
Steel 410 Industrial Flanges Face Types
The face decides the gasket, so name it on the purchase order alongside the class.
Key Advantages of Stainless Steel F410 Blind Flanges
Why project buyers keep 410 on the approved list instead of defaulting to an austenitic grade.
Hardness You Can Dial In
- Heat treatment sets the property class you need
Wear And Galling Resistance
- Holds up where repeated make-and-break scores softer faces
Stable Input Cost
- Minimal nickel keeps quotes steadier across a long project
Elevated Temperature Service
- Retains useful strength in hot refinery and steam lines
Machines Cleanly
- Annealed blanks cut well, giving crisp serrated faces
Easy Field Identification
- Magnetic response plus PMI confirms grade in seconds
SUS F410 Pipe Flanges Delivery Timeline
Choose the shipping option that fits your project schedule - lead times are confirmed after size, class and finish are finalized.
Ex-Stock Dispatch
Standard Stainless Steel 410 Flanges can be dispatched from our Mumbai facility within 4–6 days, subject to stock.
Sea Freight
FCL or consolidated LCL shipments generally take 20–38 days port to port, depending on the destination.
Air Freight
Priority air shipments can be arranged in around 4–7 days for urgent Stainless Steel 410 Flanges requirements.
Country-Specific ETA
Share your delivery location and we will confirm the estimated transit and delivery timeline.
Stainless Steel 410 Flanges FAQs
Quick answers to common questions about Stainless Steel 410 Flanges.
Which is better, SS 410 Flanges or 316 Stainless Steel Flanges?
410 offers higher hardness and wear resistance, while 316 provides better corrosion resistance in chloride environments.
What is the equivalent grade of AISI 410 Flanges?
Stainless Steel 410 corresponds to UNS S41000, EN 1.4006 and ASTM A182 F6a for forged flanges.
What is the hardness of SS F410 Slip On Flanges?
ASTM A182 F6a flanges typically range from 143–207 HBW annealed to 167–229 HBW hardened and tempered.
Do you export SUS F410 Pipe Flanges to South Africa, the UAE, Kenya and Canada?
Yes, Stainless Steel 410 Flanges can be supplied for export with the required inspection and documentation.
Are Werkstoff No 1.4006 Stainless Steel Reducing Flanges magnetic?
Yes, Stainless Steel 410 is magnetic because of its martensitic structure.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
