Nickel 200 Fasteners Requirements Snapshot
Mortec At A Glance
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, PED • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
19+ countries • GCC, Africa & Americas
Testing Offered
Mechanical, chemical & NDT • MTC EN 10204 3.1 & 3.2
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
Corrosion Resistant Alloy 200 Hex Bolt Manufacturer in India, Refer Specification
When your bill of materials calls for commercially pure nickel bolting, you need a supplier who ships to spec, not one who improvises. That's why buyers across the Middle East, Africa and the Americas trust us as their Nickel 200 fastener supplier. Alloy 200 bolts and UNS N02200 studs are the two items our stockyard moves fastest, and with hex nuts and washers held alongside them, most orders dispatch well ahead of a standard mill run.
Every Ni 200 screw we ship, and the ASTM F2281 studs that often go with them, arrives with full mill test certification and export-ready packing built for long haul freight. As a direct Nickel 200 fastener manufacturer, we machine and cold head in house with no trader layers, so pricing stays sharp and lead times stay short. Whether it's a handful of studs for an electronics enclosure or a container-load for a caustic soda plant, our grade desk confirms head style, thread and temper before you commit.
Nickel 200 Fasteners Specification
Skip the middlemen and get a direct quote, fully certified Nickel 200 fasteners exporter shipping worldwide.
Nickel 200 Fasteners Grade & Chemistry
- 99.0% min Ni + Co per ASTM B160
- Low carbon variant (Ni 201) on request
Nickel 200 Screw Temperature Limits
- Recommended service up to 315°C
- Above this, graphitization risk increases
Alloy 200 Bolts Physical Properties
- Ferromagnetic below ~354°C Curie point
- High thermal & electrical conductivity
WNR 2.4066 Hex Nut Forms Available
- Hex Bolt, Stud, Nut, Washer, Cap Screw
- Custom head style on drawing
UNS N02200 Studs Surface & Packing
- Bright, pickled or passivated finish
- Anti-tarnish wrap for export shipment
Ni 200 Screws Governing Standard
- ASTM F2281 (Bolts, Screws, Studs, Nuts)
- MTC per EN 10204 3.1 / 3.2
Buy ASTM F2281 UNS N02200 Studs and Threaded Rod With Different Head & Threads for Electronic Applications
NW 2200 Socket Head Cap Screws Applications
Caustic, electronic and chemical processing plants rely on us as a trusted Nickel 200 Fasteners Supplier in India.
Nickel 200 Fastener Supply Across The GCC
Orders confirm and stock moves fast, a trusted Nickel 200 Fasteners Exporter shipping to Gulf buyers within days.
Kuwait City
Dammam, KSA
Dubai, UAE
Muscat, Oman
Manama, Bahrain
Doha, QatarRiyadh, KSAAbu Dhabi, UAENickel 200 Fasteners Manufacturer In Mumbai Since 2012
Share your size and thread spec for an instant ex-Mumbai price.
Alloy 200 Fastener Types
We are a leading Nickel 200 fasteners manufacturer in India, backed by ex stock inventory across the most-ordered head and thread styles.
Ni 200 Hex Bolt
ASTM F2281 • M6–M36- Full & half thread available
- Bright, pickled or passivated finish
ASTM F2281 UNS N02200 Stud Bolt
Continuous & Double-End- Threaded rod cut to length
- Metric & UNC/UNF thread
WNR 2.4066 Hex Nut
DIN 934 • ASME B18.2.2- Standard hex pattern
- Matched to bolt/stud batch
Nickel 200 Heavy Hex Nut
ASME B18.2.2 • Heavy Series- Thicker across-flats for high torque
- Structural & pressure joints
Nickel Alloy 200 Flat Washer
DIN 125 • Load Spreading- Even load distribution under bolt head
- Sold with matching bolt sets
Nickel Alloy Ni-200 Spring Washer
DIN 127 • Vibration Resistant- Locks joints against loosening
- Common in equipment enclosures
NW 2200 Socket Head Cap Screw
ASME B18.3 • Allen Drive- Compact head for tight assemblies
- Common in instrument panels
Pure 200 Nickel Threaded Rod
Cut Length • Custom Size- Full-length threading
- Used in hanger & support systems
Alloy 200 Grub / Set Screw
DIN 916 • Headless- Cup, cone or flat point tip
- Locks collars & fixtures
Nickel 200 Fasteners, From Chicago To Sao Paulo
As a trusted Nickel 200 Fasteners Exporter, we supply North American fabricators and Latin American buyers with ex stock and mill order shipments alike.
Brazil
Chicago, USATulsa, USA
MexicoBaton Rouge, USA
ArgentinaHouston, USAAlloy 200 Self Drilling Screws Chemical Composition
As a Nickel 200 Fasteners Exporter, every batch is verified to ASTM B160 chemistry 99.0% min nickel.
Nickel Alloy Ni-200 Wing Nuts Mechanical Properties
Room temperature properties shown are for annealed ASTM B160 rod and bar, cold worked fasteners run higher strength.
Need Mill Test Certificates With Your Order?
Every heat ships with EN 10204 3.1 documentation - ask for 3.2 third-party witnessed on request.
Pure 200 Nickel Heavy Hex Nuts Material Equivalent
Commercially pure nickel has a matching designation across every major fastener standard, all built on the same chemistry.
ASTM / UNS (USA)
- UNS N02200
- ASTM F2281 (Fasteners)
- ASTM B160 (Rod & Bar)
DIN / EN (Germany)
- Werkstoff 2.4066
- EN Ni99.0
BS (United Kingdom)
- BS 3072 NA11
GOST (Russia)
- НП2 (NP2)
Cross-reference figures shown are commonly cited equivalents - please confirm the exact match against your customer's material specification before finalising an order.
Nickel 200 Fasteners, Ex-Stock & Ready To Ship Across Africa
As a trusted Nickel 200 Fasteners Exporter, we send container ready shipments to buyers across North, West, East and Southern Africa.
Addis Ababa
Johannesburg, SA
Dakar, Senegal
Cairo, Egypt
Casablanca & Tangier
Victoria, Seychelles
Lagos, Nigeria
AlgeriaNickel 200 Fasteners vs Nickel 201 Fasteners
Both grades share the same pure nickel base, only the carbon ceiling decides where each one gets specified.
Nickel 200 Fasteners
- Carbon: 0.15% max
- Service Temp: Up to 315°C
- Best For: General ambient & moderate-heat duty
- Relative Cost: Lower
Nickel 201 Fasteners
- Carbon: 0.02% max
- Service Temp: Above 315°C
- Best For: Avoiding graphitization at high heat
- Relative Cost: Slightly higher
Nickel Alloy 200 Lock Washers Head & Thread Options
Match the drive and thread callout on your drawing against what we hold ex stock.
Building To A Specific Head Or Thread Callout?
Tell us your drawing reference - we cross-match head style, pitch and finish before dispatch.
Ni 200 Heavy Hex Nuts Corrosion Resistance Chart
Where Nickel 200 bolting typically outperforms standard stainless and copper alloy fasteners.
Extending Nickel 200 Fastener Supply Into Caucasus & Central Asia
As a growing Nickel 200 Fasteners Exporter, we're building supply lines into the Caucasus and Central Asian industrial corridor.
Armenia
AzerbaijanNickel 200 Hex Head Cap Screws Torque & Installation Guide
Follow these four steps to avoid galling and get a consistent clamp load.
Anti-Seize First
Nickel threads gall easily; apply a nickel-compatible anti-seize before assembly.
Set Torque By Condition
Use lower torque values for annealed fasteners than for cold-worked ones.
Even, Sequential Tightening
Cross-pattern tightening keeps clamp load balanced across the joint.
Check & Log
Verify final torque with a calibrated wrench and record the reading.
Need torque values for your exact size and temper? Request the chart with your RFQ.
ASTM F2281 UNS N02200 Supplier In Dubai, Compliant To Spec
Confirm your grade and thread callout before you place the order.
WNR 2.4066 Hex Nut Shipping & Lead Time
The moment order and payment confirm, dispatch starts from Mumbai, transit time depends on your destination port.
Ex-Stock Dispatch
Ready-stock hex bolts, nuts & studs leave within 3–5 working days
Sea Freight
Most economical for bulk fastener orders, 2–5 weeks by destination port
Air Freight
Urgent electronic or plant-shutdown orders arrive in 4–8 days
Country-Specific ETA
Tell us your port or city for a confirmed delivery schedule
Pure 200 Nickel Screw Testing & Certification
As a trusted Nickel 200 Fasteners Supplier in India, every batch is tested and MTC certified before dispatch
Ni 200 Hex Bolt Supply References
A sample of recent dispatches across our export customer base.
M12 Ni 200 Hex Bolt Sets - Caustic Soda Storage Tank
Cold-worked, full traceability, EN 10204 3.1 MTC.
Chemical Processing Contractor, South Africa
DURBAN, SOUTH AFRICAUNS N02200 Studs - Electronics Enclosure Assembly
Bright finish, dimensional inspection report.
Electronics OEM, UAE
DUBAI, UAEWNR 2.4066 Nut & Washer Sets - Pulp Plant Retrofit
Heavy hex nuts, PMI tested, EN 10204 3.1 MTC.
Pulp & Paper Contractor, Canada
VANCOUVER, CANADANi 200 Socket Head Cap Screws - Water Treatment Skid
Metric fine pitch, third-party witnessed.
Water Treatment Contractor, Kenya
NAIROBI, KENYAWNR 2.4066 Threaded Rod FAQs
Quick answers to the questions buyers ask us most before placing an order.
What is the standard price basis for Alloy 200 Bolts?
Price is quoted per kg against the day’s LME nickel rate, plus size, head/thread style, condition and testing level - share your spec for a firm number.
What is the difference between Nickel 200 and Nickel 201 fasteners?
Nickel 201 carries a lower carbon ceiling than Nickel 200, which resists graphitization above roughly 315°C; Nickel 200 is the standard choice below that temperature.
Do you supply UNS N02200 Studs to Africa, the Middle East and Canada?
Yes - we ship as manufacturer and stockholder to ports across the GCC, Africa, North America and Southeast Asia with full export documentation.
What thread and head options are available in Nickel 200 fasteners?
Hex bolts, studs and threaded rod, hex and heavy hex nuts, lock and flat washers, wing nuts, socket head cap screws and self-drilling screws, in metric and UNC/UNF threads.
Why are Ni 200 Heavy Hex Nuts used in electronic and caustic soda applications?
Commercially pure nickel keeps low electrical and thermal resistance for electronic hardware, and resists caustic alkalis better than most stainless and copper alloy fasteners.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
