Inconel X-750 Flanges Summary
Mortec At A Glance
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, PED • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
15+ countries • GCC, Africa & APAC
Testing Offered
Tensile, hardness & PMI • MTC EN 10204 3.1
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
High Creep Resistance Alloy X750 Blind Flange Manufacturer in India With UT Test
As a dedicated Inconel X-750 Flanges Manufacturer in India, Mortec Manufacturing Co starts every order right. Every order begins from heat-numbered ASTM B637 UNS N07750 billet. We upset it on our own Mumbai presses. The blank then goes through a controlled precipitation cycle. This forms the titanium and aluminium gamma-prime phase uniformly through the hub. It doesn't just form at the surface. Each aged blank is ultrasonically scanned before it moves to the CNC line. This is why a Nickel Alloy X-750 Blind Flange leaving this plant carries a clean UT record. Its chemistry data travels alongside that record.
Final machining follows ASME B16.5, ASME B16.47 Series A and B. It also follows ASME B16.36 for orifice work and ASME B16.48 for line blanks. RF, FF and RTJ facing get cut to your gasket schedule's requirements. Working as a direct Alloy X750 Flanges Supplier in India lets us hold multiple body types. This includes Weld Neck, Slip-On, Blind, Socket Weld, Threaded and Long Neck bodies. We hold these in the fast-moving classes. All flanges get released against EN 10204 3.1 or 3.2 certificates. Hardness, tensile and positive material identification results are attached to each certificate.
Inconel X-750 Flange Specification
Buy straight from the forge with ageing records, UT reports, and original MTC.
Alloy X750 Flanges Face & Thread Options
- RF, FF, RTJ facing
- NPT, BSPT, BSPP thread
Nickel X-750 Flange Dimensional Standards
- ASME B16.5, B16.47 Series A & B
- ASME B16.36, B16.48, MSS SP-44
- EN 1092-1, JIS B2220
AMS 5667 Threaded Flange Aerospace Specs
- AMS 5667, AMS 5670, AMS 5671
- AMS 5542 for sheet-cut blanks
X-750 Flange Non-Destructive Testing
- Ultrasonic scan of the forged blank
- Dye penetrant on machined faces
Inconel X-750 Flanges Raw Material Source
- VIM/VAR remelted bar and billet
- Heat-to-flange traceability retained
Nickel Alloy X-750 Flange Marking
- Heat number, grade, size, class stamped
- Marking practice to MSS SP-25
X750 Flange Supporting Material & Packing
- Ring joints, stud bolts, spiral gaskets
- VCI wrap in fumigated wooden cases
Inconel X-750 Flange Quality Systems
- ISO 9001:2015 certified plant
- PED 2014/68/EU compliance on request
Inconel X-750 Flanges Manufacturer In Mumbai – Own Forge Since 2012
Tell us the bore, class and service temperature and we will price it today.
Alloy X750 Flanges Dimension
An Inconel X-750 Flanges supplier in India keeps ready blanks or cuts mill billets.
Available Sizes
Full Dimensional Charts
Outside diameter, bolt circle, hub length, bolt-hole count and flange thickness for the class you nominate are issued as a PDF or Excel sheet with every enquiry, drawn from the ASME B16.5, B16.47 and EN 1092-1 tables.
Request Dimension ChartASTM B637 UNS N07750 Weld Neck Flange Size Chart
Class 150 raised-face dimensions taken from ASME B16.5 for the bores we move most often.
| NPS | DN | OD | Bolt Circle | Bolt Holes | Bolt Size | Thickness |
|---|---|---|---|---|---|---|
| 1″ | DN25 | 108 | 79.4 | 4 | ½″ | 14.2 |
| 2″ | DN50 | 152 | 120.7 | 4 | ⅝″ | 19.1 |
| 3″ | DN80 | 190 | 152.4 | 4 | ⅝″ | 23.9 |
| 6″ | DN150 | 279 | 241.3 | 8 | ¾″ | 25.4 |
| 10″ | DN250 | 406 | 361.9 | 12 | ⅞″ | 30.2 |
WNR 2.4669 Slip On Flange Finishes
Face finish serration pitch and roughness are cut precisely to your specified gasket schedule.
Nickel Alloy X-750 Blind Flange Pressure Class Range
Bodies are machined across the full ASME class ladder; open a class for the duty it usually lands on.
150#Class 150
Thin-section bodies for exhaust ducting, furnace hoods and low-pressure hot gas lines.
300#Class 300
The class most often quoted for turbine casings, heat-treatment plant and reformer piping.
600#Class 600
Chosen where thermal cycling and bolt relaxation must both be held in check.
900#Class 900
Heavier hub for hot gas expander and steam-side connections in power plant.
1500#Class 1500
Specified on high-pressure test rigs and downhole tool make-up joints.
2500#Class 2500
The heaviest body we cut in X-750, used on research and aerospace test loops.
Inconel X-750 Flange Types
ASTM B637 UNS N07750 Weld Neck Flange
ASME B16.5 • ½″–24″- Tapered hub carries thermal gradient
- First choice for cyclic hot service
WNR 2.4669 Slip On Flange
ASME B16.5 • Class 150–600- Slides over pipe, double fillet weld
- Lower fit-up cost on site
Nickel Alloy X-750 Blind Flange
ASME B16.5 • All Classes- Solid disc, no bore to machine
- Closes nozzles and future tie-ins
Nickel X-750 Socket Weld Flanges
ASME B16.5 • ≤4″ NB- Counterbore seats the pipe end
- Suits small-bore hot instrument lines
AMS 5667 Threaded Flange
ASME B16.5 • ≤4″ NB- NPT or BSPT bore, no welding
- Used on test rigs and skid packages
Inconel Alloy X-750 Long Neck Flanges
Long Weld Neck • Bored To Order- Extended barrel forms the nozzle itself
- Removes one weld from vessel shells
Pyromet® X750 Reducing Flange
ASME B16.5 • One-Step Reduction- Large drilling with a smaller bore
- Saves a reducer in tight layouts
X-750 Inconel Spectacle Blind Flange
ASME B16.48 • Line Isolation- Figure-eight plate, flip to isolate
- Position visible from the walkway
Nickelvac® X750 Orifice Flanges
ASME B16.36 • Class 300–2500- Tapped pressure taps and jack screws
- Built for hot-gas flow measurement
Specialized Age-Hardenable ASTM B637 UNS N07750 Slip On and Weld Neck Flange Built For Extreme Thermal Load
UNS N07750 Flange Chemical Composition
As an Inconel X-750 Flanges manufacturer in India, alloy additions form gamma prime particles.
Nicrofer 7016 Plate Flanges Mechanical Properties
Reliable Manufacturer with a reputation for precision, quality, and endurance.
ASME SB 637 N07750 Puddle Flanges Material Equivalent
Nickel chromium chemistry carries different standards designations, so quote whichever name your specification requires.
ASTM / ASME / AMS (USA)
- UNS N07750
- ASTM B637 / ASME SB-637
- AMS 5667, AMS 5670, AMS 5671
- AMS 5542 (Sheet, Strip & Plate)
DIN / W.Nr (Germany)
- Werkstoff 2.4669
- NiCr15Fe7TiAl
- DIN 17742 / 17752
JIS (Japan)
- NCF 750
- JIS G4901 (Bar)
- JIS B2220 (Flange Dimensions)
GB (China)
- GH4145
- GH145 (Former Designation)
Registered Trade Names
- INCONEL® alloy X-750
- Nicrofer® 7016 TiAl
- Pyromet® alloy X-750
- Nickelvac® X-750
Flange Dimensional Codes
- ASME B16.5 / B16.47 A & B
- ASME B16.36 / B16.48
- EN 1092-1 (PN 6–PN 100)
- MSS SP-44
Nickel X-750 Socket Weld Flanges HSN Code & Export Documents
Nickel Alloy X-750 Blind Flange Exporter In India To Jebel Ali & Khalifa Port
Aged, UT-cleared bodies crated and papered for UAE customs release.
Inconel Alloy X-750 Long Neck Flanges Age-Hardening Conditions
Inconel 750 has three conditions based on ageing, recorded on the material test certificate.
Solution Treated & Aged
- High solution temperature, single ageing step
- Chosen for creep and stress-rupture duty
- Coarser grain, best long-term hot strength
Equalized & Aged
- Intermediate equalizing soak, then aged
- The usual pick for continuous service near 650 °C
- Balanced strength and ductility for flanges
Annealed & Triple Aged
- Anneal followed by two ageing stages
- Spring temper, peak room-temperature strength
- Used on seal rings and clamped joints
What Appears On Your MTC
- Furnace chart reference and soak record
- Hardness taken after the final ageing step
- Condition wording matched to your PO text
Pyromet X750 Reducing Flange Service Temperature Range
Grade X-750 maintains working load capacity in extreme temperature bands where stainless and duplex fail.
Inconel X-750 (N07750)
- Strengthening: Gamma-prime, Ti + Al precipitation
- Hot Strength: Held into the 700 °C band
- Best For: Turbines, furnaces, thermal cycling joints
- Watch: Ageing condition must match service temperature
Inconel 625 (N06625)
- Strengthening: Solid solution, Mo + Nb
- Hot Strength: Lower than aged X-750 at temperature
- Best For: Seawater, acid and chloride corrosion duty
- Watch: No age-hardening response to specify
X-750 Inconel Spectacle Blind Flange UT, NDT & Inspection
Age-hardened nickel forgings are ultrasonically cleared for internal defects before any machining begins.
Nickelvac X750 Orifice Flanges Country Compliance Documents
An Inconel X-750 Flanges exporter prepares required destination paperwork before sealing every container.
South Africa
- Durban & Richards Bay discharge
- MTC pack matched to SANS-referenced specs
- Importer VAT and customs code on the invoice
United Arab Emirates
- Jebel Ali, Khalifa & Hamriyah discharge
- Vendor-approval document sets for EPC buyers
- Heat-number traceability back to the billet
Kenya
- KEBS PVoC inspection coordinated pre-shipment
- Certificate of Conformity issued before sailing
- Mombasa clearance with IDF reference quoted
Canada
- CRN documentation support under CSA B51
- Data packs formatted for ABSA and TSSA review
- Montreal, Toronto & Vancouver delivery
AMS 5667 Threaded Flange Applications & Industries
The sectors that put X-750 on a flange line, and the reason the grade gets specified there.
Inconel X-750 Flanges Stocked & Dispatched Worldwide
Aged stock and mill-order production leaving Mumbai for buyers in these markets and beyond.
UAE
TurkeyCanadaUK
Saudi Arabia
SingaporeUSA
Mexico
Thailand
Italy
NetherlandsGermany
Philippines
Malaysia
Uganda
IndonesiaSouth Africa
Vietnam
VenezuelaASTM B637 UNS N07750 Flange Supplier In Chennai – EN 10204 3.2 On Request
Countersigned certificates and witnessed testing arranged before the lot ships.
Alloy X750 Flanges Delivery Estimate
Indicative despatch windows once bore, class, facing and ageing condition are locked at order confirmation.
Ex-Stock Dispatch
- Stocked classes clear our despatch bay in 3–5 working days
Sea Freight
- 18–38 days port-to-port sailing out of Nhava Sheva
Air Freight
- 4–7 days when a turnaround or outage cannot wait
Country-Specific ETA
- Exact door-to-port schedule issued with your proforma invoice
Inconel X-750 Flanges FAQs
The questions buyers put to our desk before releasing an X-750 order.
Which material standard covers ASTM B637 UNS N07750 weld neck flanges?
Forgings meet ASTM B637 or AMS 5667, machined to ASME dimensions.
Which age-hardening condition should be specified for Alloy X750 flanges?
Equalized and aged suits 650 °C duty; solution treated and aged for creep.
Are Nickel X-750 socket weld flanges ultrasonically tested?
Yes. Every WNR 2.4669 forged blank is scanned before machining, certified to EN 10204.
Is UNS N07750 a listed material in ASME B16.5 for blind and orifice flanges?
No. We machine Nickelvac X750 orifice flanges to B16.5 dimensions; you set the rating basis.
Do you supply Pyromet X750 reducing and lap joint flanges for export?
Yes. Full document pack, Kenya PVoC and Canadian CRN support included for all export orders.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
