Inconel 600 Fasteners Quick Reference Spec
Mortec At A Glance
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, PED • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
19+ countries • GCC, Africa & Americas
Testing Offered
Mechanical, chemical & NDT • MTC EN 10204 3.1 & 3.2
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
Prime Quality Nickel Alloy 600 Bolts Manufacturer in India With MTC, Refer Specification
When your process line runs hot, corrosive or both, standard steel fasteners give up long before the flange or vessel they hold together does. That's why fabricators across the Middle East, Africa and the Americas turn to us for Inconel 600 fasteners, a Ni-Cr-Fe grade built to hold torque through repeated thermal cycling. Our Mumbai stockyard keeps Inconel 600 bolts, Inconel 600 stud bolts, nuts and washers ready in the sizes buyers order most, so a same-week dispatch is the rule, not the exception.
Every Alloy 600 fastener, right down to the ASTM B166 Inconel 600 nuts and UNS N06600 washers, leaves our facility with mill test certification, NACE MR0175 / ISO 15156 compliance on request, and export packing built to survive a long sea voyage. As a direct manufacturer with no trader layer in between, our grade desk confirms thread, head style and finish before you commit, and a single WhatsApp message gets you an instant ex-Mumbai quote on the exact size you need.
Inconel 600 Fasteners Specification
As a trusted Inconel 600 Fasteners Exporter, we send stock straight to buyers worldwide, MTC always included.
WNR 2.4816 Fastener Sour Service Compliance
- NACE MR0175 / MR0103
- ISO 15156 qualified on request
Inconel 600 Bolts Head & Drive Styles
- Hex Head, Socket/Allen, Slotted
- Hex Nut, Flat & Spring Washer
Alloy 600 Fasteners Manufacturing Origin
- Indian, European, Japanese mills
- Origin certificate on request
Inconel 600 Screws Testing & Documentation
- PMI, Hardness, Proof Load, Tensile
- MTC, Lab Report, TPI on request
Inconel 600 Fasteners Packing & Supporting Material
- Individually boxed or bulk export crates
- Anti-tarnish wrap for long sea transit
Alloy 600 Hex Bolts Finish
- Bright Machined, Passivated
- Black Oxide, Dry-Film Lube on request
Ready Stock of DIN 2.4816 Threaded Rod and Washers in Different Sizes & Threads At Fair Price
ASTM B166 Inconel 600 Nuts Thread & Size Range
These are metric coarse pitch sizes for our best-selling Inconel 600 bolts, studs and nuts, with imperial sizing available on request.
| Nominal Size | Coarse Pitch (mm) | Nearest UNC/UNF |
|---|---|---|
| M6 | 1.00 | 1/4″ |
| M8 | 1.25 | 5/16″ |
| M10 | 1.50 | 3/8″ |
| M12 | 1.75 | 1/2″ |
| M16 | 2.00 | 5/8″ |
| M20 | 2.50 | 3/4″ |
| M24 | 3.00 | 1″ |
| M30 | 3.50 | 1 1/4″ |
| M36 | 4.00 | 1 1/2″ |
| M48 | 5.00 | 2″ |
| M64 | 6.00 | 2 1/2″ |
DIN 2.4816 Threaded Rod and Washers Manufacturing Standards
We check every fastener's dimensions against these governing codes before it leaves our facility.
ASTM F467 UNS N06600 Fastener Types
Every common size stays ready in our stock, backing our name as a leading Inconel 600 Fasteners Supplier in India.
Inconel 600 Hex Bolt
ASTM F468 • M6–M64- Full-thread or partial-thread
- Common flange & vessel closure bolt
Alloy 600 Stud Bolt
ASTM F468 • With 2 Nuts- Continuous or double-end thread
- Standard on high-temperature flanges
UNS N06600 Hex Nut
ASTM F467 • Heavy Hex- Standard & heavy hex pattern
- Matched to Metric & UNC/UNF studs
Nickel Alloy 600 Flat & Spring Washer
DIN 125 / DIN 127- Load-spreading flat washer
- Spring type resists vibration loosening
ASTM B166 Inconel 600 Socket Head Cap Screw
ASME B18.3 • Allen Drive- Compact head for tight clearances
- Used on instrument & machine covers
DIN 2.4816 Threaded Rod
Inconel Alloy 600 • Cut Length- Full-length threading, custom cut
- Used in hanger & suspension systems
Inconel 600 Grub / Set Screw
DIN 916 • Headless- Cup, cone or flat point tip
- Locks pulleys, collars & fixtures
Nickel Alloy 600 Rivet
Solid & Blind Type- Permanent, vibration-resistant joint
- Common on furnace & duct panels
UNS N06600 U-Bolt
Custom Bent • With Nuts- Bent to size for pipe & tube clamping
- Used in pipe hanger & support systems
ASTM B166 Inconel 600 Nuts Dimension Chart
These figures are indicative only. Please confirm exact dimensions against your own drawing or standard prior to placing an order.
| NPS | Bolt Circle Dia. | No. of Bolts | Stud Diameter |
|---|---|---|---|
| 1/2″ | 2-3/8″ | 4 | 1/2″ |
| 1″ | 3-1/8″ | 4 | 1/2″ |
| 2″ | 4-3/4″ | 4 | 5/8″ |
| 4″ | 7-1/2″ | 8 | 5/8″ |
| 6″ | 9-1/2″ | 8 | 3/4″ |
| 8″ | 11-3/4″ | 8 | 3/4″ |
| 10″ | 14-3/4″ | 12 | 7/8″ |
| 12″ | 17″ | 12 | 7/8″ |
Inconel 600 Fasteners Manufacturer In Mumbai Since 2012
Bolts, nuts, studs and washers machined and dispatched from our own Mumbai facility.
UNS N06600 Washers Chemical Composition
Its ASTM B166 nickel-chromium-iron makeup is what protects Inconel 600 from oxidation and caustic attack at elevated heat.
Inconel 600 Screws Mechanical Properties
Every batch is MTC verified against ASTM B166 minimum properties for solution annealed Alloy 600 rod, our raw material.
Alloy 600 Hex Bolts Torque Chart
Use this quick reference to tighten Inconel 600 fasteners at the right torque for your size and flange class.
| Flange Class | NPS Range | Stud Diameter | Recommended Torque (1st / 2nd / Final, ft-lb) |
|---|---|---|---|
| Class 150 | 1/2″ – 1-1/2″ | 1/2″ | 10 / 20 / 30–60 |
| Class 150 | 2″ – 4″ | 5/8″ | 40 / 80 / 120 |
| Class 150 | 5″ – 8″ | 3/4″ | 60 / 120 / 200 |
| Class 150 | 10″ – 12″ | 7/8″ | 95 / 190 / 320 |
| Class 300 | 1/2″ – 1-1/2″ | 1/2″ – 3/4″ | 10 / 20 / 30–150 |
| Class 300 | 2″ – 4″ | 5/8″ – 3/4″ | 33 / 66 / 110–200 |
| Class 300 | 6″ – 12″ | 3/4″ – 1-1/8″ | 60 / 120 / 200–710 |
Inconel Alloy 600 Stud Equivalent Grades
Buyers overseas can match Inconel 600 to the corresponding grade name used under their own local standard.
ASTM / UNS (USA)
- UNS N06600
- ASTM B166 / F467 / F468
DIN / WNr (Germany)
- WNr 2.4816
- NiCr15Fe (EN 10095)
JIS (Japan)
- NCF600
- JIS H4551 / H4552
BS (United Kingdom)
- BS 3072–3076 NA13
- Follows EN 10095 (2.4816)
AFNOR / ISO (France)
- NC15Fe
- ISO NiCr15Fe
GOST (Russia)
- ХН78Т (ChN78T) – nearest analog
- Confirm exact match with your inspector
Middle East and GCC Trust Us for Nickel Alloy 600 Bolts
As a trusted Inconel 600 Fasteners Exporter, we keep inventory ready and dispatch quickly to meet tight GCC deadlines.
Dubai, UAEAbu Dhabi, UAE
Riyadh, KSA
Istanbul, Turkey
Doha, QatarInconel Alloy 600 Stud Weight Chart
Use this reference to estimate Inconel 600 fastener weights by size, but confirm exact figures against your own drawing first.
| Nominal Size | Hex Bolt (x50mm) | Hex Nut | Flat Washer |
|---|---|---|---|
| M6 | 1.03 | 0.44 | 0.08 |
| M8 | 1.87 | 0.83 | 0.16 |
| M10 | 3.51 | 1.62 | 0.25 |
| M12 | 5.68 | 2.62 | 0.38 |
| M16 | 11.26 | 5.55 | 0.89 |
| M20 | 19.44 | 10.20 | 1.52 |
| M24 | 31.25 | 17.60 | 2.62 |
| M30 | 52.63 | 32.00 | 4.43 |
| M36 | 83.33 | 54.30 | 6.73 |
Need Mill Test Certificates With Your DIN 2.4816 Threaded Rod and Washers Order?
EN 10204 3.1 paperwork comes standard with every batch, 3.2 third-party witnessed available upon request.
Inconel 600 Fasteners vs Inconel 625 Fasteners
This is the comparison buyers request most, how these two nickel alloys perform against each other in bolting duty.
Inconel 600 Fasteners
- Alloying: Ni-Cr-Fe, no Mo/Nb
- Yield Strength: 35 ksi / 240 MPa min
- Max Service Temp: ~1035°C
- Best For: Caustic, carburizing, dry high-heat service
- Relative Cost: Lower
Inconel 625 Fasteners
- Alloying: Ni-Cr-Mo-Nb
- Yield Strength: 60 ksi / 414 MPa min
- Max Service Temp: ~982°C
- Best For: Subsea, sour service, wet chloride media
- Relative Cost: Higher
Ex-Stock Nickel Alloy 600 Bolts Ready To Ship Across Africa
We prepare container-ready fastener shipments bound for buyers across Southern, East and West Africa.
Johannesburg, SADurban, SA
Kampala, Uganda
Jakarta, Indonesia
Ho Chi Minh CityAlloy 600 Bolts Exporter In India To Durban, South Africa
We pack and ship Alloy 600 fastener orders straight to Durban port.
Inconel 600 Stud Bolts Corrosion & High Temperature Performance
These properties are why Alloy 600 gets specified for hot, caustic and cyclic temperature bolting.
Nickel Alloy 600 Rivets Price Factors
Share your requirements with us, a trusted Inconel 600 Fasteners Manufacturer in India known for on time delivery.
Nickel Alloy 600 Bolts Available On Demand From Toronto To Mexico City
Our ready stock keeps orders flowing to North American fabricators and Latin American buyers alike.
Toronto, CanadaCalgary, CanadaHouston, USA
Mexico City, Mexico
Caracas, VenezuelaASTM F467 Inconel 600 Nut Supplier In Chennai With Full MTC
Every nut leaves our Chennai-bound stock backed by EN 10204 3.1 traceable documentation.
Inconel 600 Fasteners Manufacturing Process
Every fastener passes through four stages, raw rod to heat stamped finish, at our ISO certified facility.
Rod Selection
ASTM B166 hot-finished or cold-drawn bar cut to blank length.
Forging / Heading
Bolt heads cold or hot formed; studs and rods turned on lathe.
Thread Rolling / Cutting
Metric or UNC/UNF thread cut to DIN 13 / ASME B18 tolerance.
Test & Mark
Proof load, hardness and PMI testing before heat-number stamping.
Inconel 600 Bolts Order Turnaround By Shipping Mode
Once payment clears, our Inconel 600 Fasteners Manufacturer in Mumbai unit dispatches your order, just pick a freight mode below.
Same-Week Ex-Stock Dispatch
Standard bolt, nut and washer sizes leave our unit in 3–5 working days
Sea Freight (FCL/LCL)
Most economical route, typically 2–5 weeks depending on destination port
Air Freight (Priority)
4–8 days transit for urgent shutdown or turnaround orders
Country-Wise Delivery Estimate
Share your delivery pin-code or port for a confirmed ETA
Alloy 600 Hex Bolts Testing & Certification
We run each of these checks on request and log the results on your mill test certificate.
ASTM B166 Inconel 600 Nuts Applications
Buyers across India and export markets rely on us for fast dispatch across the industries that specify Inconel 600 fasteners most.
Inconel Alloy 600 Stud Supply References
Here is a snapshot of recent Inconel 600 fastener dispatches to buyers across the GCC, Africa and Americas.
M16 Inconel 600 Stud Bolt Set - Furnace Duct Retrofit
With 2 heavy hex nuts, MTC EN 10204 3.1, bright machined.
Industrial Furnace Contractor, South Africa
JOHANNESBURG, SOUTH AFRICAM12 Inconel 600 Hex Bolt & Nut - Chemical Reactor Overhaul
PMI tested, NACE MR0175 on request, third-party witnessed.
Chemical Processing Contractor, UAE
ABU DHABI, UAE3/4″ UNC Inconel 600 Threaded Rod - Heat Treat Basket Frame
Cut length, EN 10204 3.1 MTC, dry-film lube finish.
Heat Treatment Contractor, Canada
CALGARY, CANADAM10 Inconel 600 Socket Head Cap Screw - Boiler Instrument Panel
Passivated finish, hardness & tensile test report.
Power Plant Contractor, Kenya
NAIROBI, KENYATop Export Countries
Canada
United Kingdom
Germany
Netherlands
Italy
UAE
Saudi Arabia
South Africa
Kenya
Uganda
Thailand
Malaysia
Philippines
Mexico
Turkey
Inconel 600 Fasteners FAQs
Here are direct answers to the questions buyers ask most, from a leading Inconel 600 Fasteners Manufacturer in India.
What is the standard price basis for Inconel 600 Bolts and Alloy 600 Fasteners?
Price is quoted per kg or per piece against the day’s nickel rate, plus size, head style, thread length and testing level - share your spec for a firm number.
Do you supply Inconel 600 Screws within India as well as for export?
Yes, we dispatch pan India from our Mumbai stockyard and export as manufacturer and stockholder to over 19 countries with full documentation.
What is the difference between Inconel 600 and Inconel 625 fasteners?
Alloy 625 adds moly and niobium for more strength and pitting resistance. Alloy 600 is simpler better for caustic and high-temp dry service.
What thread standards are ASTM B166 Inconel 600 Nuts and Inconel 600 Stud Bolts available in?
We supply Metric coarse and fine (DIN 13), UNC, UNF and BSW thread series machined to your drawing or standard bolt chart.
Can Nickel Alloy 600 Rivets and UNS N06600 Washers be supplied with NACE or sour service compliance?
Yes, NACE MR0175 / ISO 15156 qualification is available on request along with third-party witnessed testing.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
