ISO 9001 Certified Hastelloy X Fastener Manufacturer Ex-Stock M6–M36, MTC EN 10204 3.1 & 3.2 High-Temperature Alloy Fastener Manufacturer Since 2012

Hastelloy X Fasteners

Hastelloy X Fasteners Features

Grade / UNSHastelloy X / UNS N06002
Governing StandardASTM B572, AMS 5754
Size RangeM6 to M36 • 1/4″ to 1.1/2″ dia
Alloying ElementsNi-Cr-Fe-Mo, 20.5–23% Cr, 8–10% Mo
Supply ConditionSolution Annealed
Forms In StockBolt, Stud, Nut, Screw, Washer, Weld Stud
MTC CertificateEN 10204 3.1 and 3.2
Thread SeriesUNC, UNF, Metric Coarse & Fine
Delivery TimeEx-Stock: Same Week • Made-To-Order: 4–6 Wks
Logistics BaseEx-Mumbai, Sea & Air Freight Worldwide
100% Traceable
Mill Test Certified
Heat-number chemistry and hardness records on every batch
Same-Week Dispatch
On Ex-Stock Sizes
Popular bolt and nut sizes leave our unit within days
ISO 9001:2015
Certified Manufacturer
Documented process control from bar to finished fastener
19 Countries
Export Track Record
GCC, Africa, Europe, Americas & Southeast Asia
Zero Middlemen
Mill-Direct Pricing
Direct ex-works pricing, no trader markup
Free Grade Check
Talk To Our Engineer
Confirm size, condition & hardness before you order
hastelloy x fasteners

 

0 · at glance

Mortec At A Glance

Established

Since 2012 • 15+ yrs experience

Manufacturing Units

2 in-house units • Taloja & Mazgaon

Stockyard Area

8,850+ sq.ft • Ready-stock inventory

Certifications

ISO 9001:2015 • GST, IEC & MSME

Clientele

100+ clients • India & export markets

Export Reach

19 countries • GCC, Africa & APAC

Testing Offered

PMI, chemical & tensile • MTC EN 10204 3.1 & 3.2

Shipment Documents

Invoice, Packing List • COO, COI, MTC, BL & Lab Report

ISO Approved ASTM B574 UNS N06002 Bolts Manufacturer In India With MTC

When a project runs hotter than ordinary stainless or alloy steel can handle, Hastelloy X earns its place - a nickel-chromium-iron-molybdenum alloy prized for oxidation resistance and stable strength deep into the four-figure Celsius range. Buyers across the Gulf, Africa and the Americas turn to us for ready stock across bolts, studs, nuts and screws, backed by an in-house testing set-up that keeps every heat traceable back to source. Get top-grade of ASTM B574 UNS N06002 Bolts Manufacturer in India With MTC

Every Hastelloy X fastener leaves our facility with full mill documentation, size and thread verified before packing, and an export pack built for long-haul freight. As a direct manufacturer with no trading layer in between, our grade desk confirms alloy, condition and thread spec before you commit - so what ships matches what you specified, every time.

01 · Specification

Hastelloy X Fasteners Specification

Request direct quotes and original MTCs from an established worldwide Hastelloy X fasteners exporter.

hastelloy x fasteners specification  

Hastelloy X Fastener Dimensional Standards

  • ASME B18.2.1, B18.2.2, B18.3, B18.6.3
  • DIN 931/933/934/912, ISO 4014/4017/4032/4762

UNS N06002 Bar & Forging Base Standard

  • ASTM B572 / ASME SB572 bar & rod
  • AMS 5754 bar, forging & ring stock

Alloy X Fastener Finish Options

  • Bright machined, bead-blasted
  • Pickled & passivated on request

Hastelloy X Testing Scope

  • PMI, tensile & proof load, IGC check
  • Third-party inspection (TPI) on request

UNS N06002 Supporting Hardware

  • Matching hex nuts, flat washers, weld studs
  • Anti-galling export crating

Hastelloy Alloy X Compliance On Request

  • NACE MR0175 / ISO 15156 documentation
  • PED 2014/68/EU pack for European buyers

Alloy X Weld Filler Compatibility

  • AWS A5.14 ERNiCrMo-2 filler wire matched
  • GTAW, GMAW & SMAW joinable

Hastelloy X Melt Source

  • Reputed Indian & European mill bar stock
  • Mill origin certificate on request

Hastelloy X Fasteners Manufacturer In Mumbai Since 2012

Share your drawing or size list for an instant ex-Mumbai Hastelloy X price.

Request Quote Now
02 ·Size Chart

Alloy Hastelloy X Fasteners Size Chart

Standard metric thread dimensions for Hastelloy X hex bolts, studs and matching hex nuts, ex-stock M6 to M36.

Thread Dia (d)Coarse Pitch (mm)Wrench Size / AF (mm)Bolt Head Height (mm)
M61.00104.0
M81.25135.5
M101.50177.0
M121.75198.0
M142.00229.0
M162.002410.0
M202.503013.0
M243.003615.0
M303.504619.0
M364.005523.0
03 · Product Range

Hastelloy X Fasteners Types

Hastelloy X Fasteners manufacturer in India offering full ex-stock and made-to-order ranges.

Hastelloy X Hex Bolt

Hastelloy X Hex Bolt

DIN 931/933 • ASME B18.2.1
  • Full or partial thread
  • Solution-annealed condition
Hastelloy Alloy X Threaded Rod / Stud Bolt

Alloy X Stud Bolt & Threaded Rod

Continuous & Double-End
  • Cut to any length
  • UNC, UNF or metric pitch
UNS N06002 Hastelloy Hex Nut

Hastelloy X Hex Nut

DIN 934 • ASME B18.2.2
  • Standard & heavy hex
  • Matched to bolt/stud pitch
Alloy Hastelloy X Jam Nut

Hastelloy X Jam Nut

Low-Profile Locking
  • Thin-form vibration lock
  • Paired with fine-pitch studs
2.4665 Hastelloy Flat Washer

Hastelloy X Flat Washer

DIN 125 • ISO 7089
  • Plain & spring washer
  • Load-spreading under head
Hastelloy Alloy X Socket Head Cap Screw

Alloy X Socket Head Cap Screw

DIN 912 • ISO 4762
  • High-torque internal hex drive
  • Compact head for tight bores
WNR 2.4665 Weld Stud

Hastelloy X Weld Stud

Matched Filler Chemistry
  • Drawn-arc & threaded types
  • ERNiCrMo-2 compatible
UNS N06002 Allen Screw

Hastelloy X Allen & Grub Screw

ASME B18.6.3 • ISO 4026
  • Cup, flat or cone point
  • Fine thread for precision fit

Ready Stock Of UNS N06002 Stud Bolts And Hex Nuts For Gas Turbine & Furnace Applications At Best Prices

04 · Cross-Reference

Hastelloy N06002 Stud Bolts Material Equivalent

Hastelloy X / UNS N06002 carries an equivalent designation across major standards and mill brand names.

USAASTM / AMS (USA)

  • UNS N06002
  • ASTM B572 / ASME SB572 (Bar & Rod)
  • AMS 5754 (Bar, Forging & Ring)
  • AMS 5536 (Sheet, Plate & Strip)

GermanyDIN / Werkstoff (Germany)

  • Werkstoff 2.4665
  • NiCr22Fe18Mo
  • DIN 17742

Common Trade Names

  • Inconel HX
  • Nicrofer 4722 Co / Microfer 4722
  • Pyromet 680
  • Nickelvac HX
05 · Composition

UNS N06002 Alloy X Bolts Chemical Composition

Hastelloy X's balanced Ni-Cr-Fe-Mo chemistry is what unlocks its high-temperature strength and oxidation resistance.

Chemical Composition - UNS N06002 (% by weight)
NiBalanceNickel
Cr20.50–23.00Chromium
Fe17.00–20.00Iron
Mo8.00–10.00Molybdenum
Co0.50–2.50Cobalt
W0.20–1.00Tungsten
C0.05–0.15Carbon
Mn1.00 maxManganese
Si1.00 maxSilicon
P0.040 maxPhosphorus
S0.030 maxSulfur
B0.010 maxBoron
06 · Strength Data

WNR 2.4665 Hastelloy Screws Mechanical Properties

Solution-Annealed Condition, Room Temperature (Typical)
Tensile Strength783 MPa / 113.5 ksi
Yield Strength (0.2%)376 MPa / 54.5 ksi
Elongation46.5% typical
Hardness≤90 HRB (∼200 HB)

Elevated-temperature strength retention (typical, solution-annealed sheet):

Test TempYield StrengthTensile StrengthElongation
21°C / 70°F376 MPa / 54.5 ksi783 MPa / 113.5 ksi46.5%
538°C / 1000°F253 MPa / 36.7 ksi628 MPa / 91.0 ksi53.6%
649°C / 1200°F241 MPa / 34.9 ksi580 MPa / 84.2 ksi65.5%
760°C / 1400°F233 MPa / 33.8 ksi424 MPa / 61.6 ksi95.6%
871°C / 1600°F193 MPa / 28.0 ksi251 MPa / 36.5 ksi117.9%
982°C / 1800°F88 MPa / 12.8 ksi130 MPa / 18.9 ksi81.5%
1093°C / 2000°F43 MPa / 6.2 ksi65 MPa / 9.5 ksi50.6%

UNS N06002 Alloy X Bolts Exporter In India Shipping To Jebel Ali & Durban

Container-ready Hastelloy X fastener packing, hardness-checked and export-documented, for Gulf and African buyers alike.

Request Export Quote
07 · Heat Resistance

Hastelloy Alloy X Washers High-Temperature & Oxidation Rating

Gas turbine and furnace buyers frequently request these Hastelloy X temperature ratings before finalizing orders.

Max Continuous Service, Air1095°C (2000°F)
Short-Term Oxidation ResistanceUp to 1200°C (2200°F)
Melting Range1260–1355°C (2300–2470°F)
08 · Comparison

Hastelloy X vs Inconel 625 Fasteners

Hastelloy X (UNS N06002)

  • Family: Ni-Cr-Fe-Mo-W, solid-solution
  • Service Temp: Up to 1095°C continuous
  • Strength Focus: Elevated-temperature oxidation
  • Best For: Combustion cans, furnace hardware

Inconel 625 (UNS N06625)

  • Family: Ni-Cr-Mo-Nb, solid-solution
  • Service Temp: Up to 982°C, cryogenic to hot
  • Strength Focus: Room-temp strength & chloride/pitting resistance
  • Best For: Marine, subsea & sour-service hardware
09 · Fabrication

UNS N06002 Hastelloy Hex Nuts Weldability & Fabrication

Weld studs, custom nuts and fabricated fixtures are joined to these process parameters.

GTAW, GMAW & SMAW Joinable
Filler AWS A5.14 ERNiCrMo-2
No Preheat, Interpass Below 93°C (200°F)
Post-Weld Anneal 1150–1175°C (2100–2150°F)
10 · Environment Fit

Alloy Hastelloy X Jam Nuts Corrosion & Atmosphere Resistance Rating

Buy Vast range of WNR 2.4665 Threaded Rod and Screws with Threading and Cold Drawn Condition.

Non-Magnetic (Austenitic, Low Permeability)
Oxidizing, Reducing & Neutral Atmosphere Resistant
Resistant To Chloride Stress-Corrosion Cracking
Good Carburization & Nitridation Resistance

ASTM B572 Hastelloy X Fastener Supplier In Chennai, ISO 9001 Certified

Southern India projects get the same mill-direct pricing and MTC pack as our overseas customers.

Get Supplier Quote
11 · Industries

Hastelloy Alloy X Threaded Rod Applications

Global industries prefer us as their Hastelloy X fastener supplier for fast, reliable dispatch.

Gas Turbine Combustion Chambers
Jet Engine Afterburner & Tailpipe Parts
Industrial Furnace Rolls & Retorts
Heat-Treating Trays & Fixtures
Petrochemical Process Equipment
Flame Holders & Spray Bars
Cabin Heater Components
Chemical Processing Plants
12 · Pricing

Hastelloy X Fasteners Price Factors

For accurate quotes, share your variables with a trusted Hastelloy X Fasteners supplier in India.

Nickel & Molybdenum MarketBase alloy cost tracks LME nickel and moly pricing.
Size & Thread PitchLarger diameter and finer thread raise machining time.
Bar vs Forged StockForged blanks cost more than machined bar for large sizes.
Testing LevelPMI, IGC checks or third-party inspection add cost.
Turnaround

Hastelloy X Fastener Delivery Estimate By Shipping Mode

Hastelloy X shipments dispatch upon payment confirmation, choose a freight mode matching your project timeline.

Ex-Stock Dispatch

Ex-stock Hastelloy X sizes clear our Mumbai warehouse within 24–48 hours of payment confirmation

Sea Freight

Budget-friendly ocean freight to your port, generally 10–25 days in transit

Air Freight

Time-critical shutdown or turnaround orders airlift out within 3–6 days

Country-Specific ETA

Share your destination country with our export desk for a confirmed delivery window

13 · Quality

Hastelloy X Fasteners Testing & Certification

Each of these checks is available on request and recorded on your mill test certificate.

PMI Testing
Tensile & Proof Load
Chemical Analysis
Hardness (HRB)
Intergranular Corrosion Check
MTC 3.1 & 3.2
Third-Party Inspection
Heat Number Traceability
Global Reach

Hastelloy X Fasteners - Countries We Export To

Ex-stock supply lines serving buyers across the Gulf, Africa, Europe, the Americas and Southeast Asia.

UAE UAE Turkey Turkey Canada Canada UK United Kingdom Saudi Arabia Saudi Arabia Singapore Singapore USA United States Mexico Mexico Thailand Thailand Italy Italy Netherlands Netherlands Germany Germany Philippines Philippines Malaysia Malaysia Uganda Uganda Indonesia Indonesia South Africa South Africa Vietnam Vietnam Venezuela Venezuela
14 ·FAQs

Hastelloy X Fasteners FAQs

Quick answers to the questions buyers ask us most before placing an order.

What is Hastelloy X material?

Solid-solution-strengthened nickel alloy (UNS N06002) with oxidation resistance and strength up to 1095°C.

Is Hastelloy X magnetic?

No - it's an austenitic, non-magnetic nickel alloy, unlike martensitic grades like 440C or 410.

What is the melting temperature of Hastelloy X?

Melting range of approximately 1260 to 1355°C (2300 to 2470°F).

What is the UNS number for Hastelloy X?

UNS N06002, cross-referenced to Werkstoff/DIN number 2.4665.

What is the density of Hastelloy material?

About 8.22 g/cm³ (0.297 lb/in³); varies slightly across grades like C276 or B2.

Hastelloy X Fasteners - Built On Trust With Mortec
Solid-solution Ni-Cr-Fe-Mo alloy rated to 1095°C continuous service
Bar, rod and forged stock held ex-Mumbai in solution-annealed condition
Every Hastelloy X batch PMI-checked with MTC EN 10204 3.1
Custom lengths, weld studs and export crating for any port

Materials



Products

Certifications & Credentials
Certified to PED 2014/68/EU for the manufacture of forged steel products
Stock, distribute and trade Steel Flanges, Nuts and Bolts, and precision-machined parts in Nickel Alloys, High Temperature Alloys and Super Alloys
Since 2012, exporting Oil and Gas piping items built to NACE MR0175 / ISO 15156 across the Egypt, Tunisia, Netherlands, Azerbaijan, South Africa, Algeria, Saudi Arabia and Morocco
Hold the largest import and stock inventory of bolting accessories, in both ferrous and non-ferrous metals, in India

Authorized Supplier For The Following Companies - Material At Reseller Price For Traders

Associated Companies - ADNOC, SABIC, Saudi Aramco, GASCO, ORPIC, KNPC, QATARGAS

Get A Quick Quote