Grade 5.6 Bolt Technicalities
Mortec Manufacturing Co At A Glance
Founded
2012 • 15+ years hot forging fasteners
In-House Units
Forging & CNC machining • Taloja & Mazgaon
Stockyard
8,850+ sq.ft • ready fastener inventory
Approvals
ISO 9001:2015, PED • RDSO, GST & IEC
Clientele
100+ buyers • domestic & export projects
Export Reach
15+ countries • Africa, GCC & Americas
Testing Offered
Proof load, hardness & chemical • NABL lab
Shipment Documents
Invoice, Packing List • COO, COI, MTC & BL
Table of Content
Zero-Defect Quality ASTM F568 Grade 5.6 Anchor Bolt Manufacturer in India, Check Tensile Strength
A holding-down bolt cast into concrete cannot be replaced after installation. Therefore, buyers need Grade 5.6 proof load results before concrete pouring. We forge, machine, and thread Class 5.6 bolts within Mumbai facilities. Our certificates show 500 MPa tensile and 300 MPa yield minimums. Full-size bolts are tested in our NABL laboratory before certification. Each test result remains traceable through the stamped heat number.
Standard hex bolts, studs, and threaded rods remain stocked from M6-M36. Bent L and J anchors follow customer drawings for required dimensions. Plate-ended anchors and oversized M42-M64 sections are also produced accordingly. Threads are rolled where drawings permit for improved thread consistency. Long anchor sections receive cut threads when required by drawings. Every thread is GO/NO-GO gauged before applying any protective coating. This ensures galvanized bolts accept Class 5 nuts throughout installation.
Grade 5.6 Bolt Specification
Grade 5.6 Bolt Manufacturer in Mumbai supplies bolts with verified sizes, threads, materials, and property class.
Grade 5.6 Bolt Head Styles
- Hex head to ISO 4014 / ISO 4017
- Heavy hex, square and special head options
- Full or partial thread as specified
Class 5.6 Stud Bolts Mechanical Properties
- 500 MPa minimum tensile strength
- 300 MPa minimum lower yield strength
- 280 MPa minimum proof stress
Hex Bolt 5.6 Grade Hardness
- 155 HV minimum hardness
- Maximum hardness controlled to the applicable standard
- 20% minimum elongation after fracture
5.6 Grade Bolt Size Range
- Standard ISO range includes metric sizes up to M39
- Custom larger diameters available by agreement
- Lengths manufactured to drawing or order specification
ASTM F568 Grade 5.6 Bolt Surface Finish
- Self-colour and oiled finish
- Zinc electroplating where specified
- Hot-dip galvanizing to ISO 10684 where required
HT Grade 5.6 Screws Testing Scope
- Tensile and proof-load testing
- Hardness and dimensional inspection
- Thread gauge and visual inspection
Grade 5.6 Anchor Bolt Certification
- EN 10204 Type 3.1 MTC available
- Chemical and mechanical test results documented
- Third-party inspection available on request
Hot Dip Galvanized Bolts Grade 5.6 Manufacturing
- Carbon steel manufactured to Class 5.6 requirements
- Forged and machined forms available
- Bolts, studs, anchor bolts and threaded rods
IS 1367 Grade 5.6 Studs Packaging
- Cartons, kegs, bundles or pallets as required
- Size, grade and lot identification on packaging
- Heat and batch traceability for certified orders
Keep Ready-to-Ship Inventory of DIN 5.6 Fasteners With Custom Coatings And Precision Threads At Unmatched Pricing
Popular Types of DIN 5.6 Fasteners
All forms meet the same Class 5.6 property limits, regardless of head or embedment design.
Hex Bolt 5.6 Grade
ISO 4014/4017 • DIN 931/933- Part or full thread, head stamped 5.6 from M5 up
Grade 5.6 Anchor Bolt
Cast-In Foundation Anchoring- Bent 90° tail, threaded projection to your drawing
HT Grade 5.6 Screws
Metric Fastening- Metric screws for general fastening and structural applications
HT Grade 5.6 Nuts
ISO 898-2 Property Class 5- Class 5 nuts supplied matched, oversize tapped if galvanized
IS 1367 Grade 5.6 Studs
Fully Threaded • IS 1367 Part 3- Continuous thread studs cut to any site length
High Tensile Class 5.6 Threaded Rod
DIN 975/976 • 1 m & 3 m Bars- Hanger and tie rod stock, cut and coated to order
Coatings of ASTM F568M Grade 5.6 Bolt
Grade 5.6 bolts are available with finishes selected for corrosion protection, service conditions and project requirements.
Grade 5.6 Bolt Manufacturer In India – Forging And CNC Lines Running Since 2012
Send the size, length and finish and our grade desk confirms class 5.6 values with a lead time the same working day.
Hex Bolt 5.6 Grade Chemical Composition
Mechanical Properties of Grade 5.6 Screw
Equivalent of High Tensile Class 5.6 Threaded Rod
ISO (International)
- ISO 898-1 – property class 5.6
- ISO 4014 / 4017 – screws
- ISO 898-2 – class 5 mating nuts
DIN (Germany)
- DIN 267-3 – DIN 5.6 fasteners
- DIN 931 / 933 – hex bolt dimensions
- DIN 975 / 976 – threaded rod
ASTM / SAE (USA)
- ASTM F568M Grade 5.6 – metric classes
- ASTM A307 Grade B – nearest inch analogue
- SAE J429 Grade 2 – nearest inch analogue
BS (United Kingdom)
- BS EN ISO 898-1 – property class 5.6
- BS 3692 – precision hex bolts
- BS 4190 – black hex bolts and nuts
JIS (Japan)
- JIS B1051 – strength class 5.6
- JIS B1180 – hex bolts
- JIS B1181 – hex nuts
Canada & Anchor Bolts
- ASTM F1554 Grade 36 – below 5.6 on yield
- ASTM F1554 Grade 55 – above 5.6 on yield
- Written comparison sheet issued with the order
Grade 5.6 Bolt Exporter - Regular Sailings To Jebel Ali And Durban
Bolt cages, templates and matched class 5 nuts leave as one crated lot with the paperwork already inside.
Anchor Bolt Grade 5.6 Embedment Types
Holding-down bolts for tanks, crushers, towers and machine foundations.
Hot Dip Galvanized Bolts Grade 5.6 Shipped Across Africa & The Gulf
Regular shipments from Nhava Sheva serve major African and GCC ports for smooth clearance.
Durban, South AfricaCape Town, SA
Mombasa, Kenya
Kampala, Uganda
Jebel Ali, UAE
Dammam, KSA
Mersin, TurkeyTorque Chart of 5.6 Grade Bolt
Torque values are calculated from Class 5.6 load limits and the specified friction factor.
| Size | Pitch (mm) | Stress Area (mm²) | Proof Load (kN) | Min Tensile Load (kN) | Torque Dry, K = 0.20 (N·m) | Torque Lubricated, K = 0.15 (N·m) |
|---|---|---|---|---|---|---|
| M6 | 1.00 | 20.1 | 5.6 | 10.1 | 4.4 | 3.3 |
| M8 | 1.25 | 36.6 | 10.2 | 18.3 | 10.7 | 8.0 |
| M10 | 1.50 | 58.0 | 16.2 | 29.0 | 21.1 | 15.8 |
| M12 | 1.75 | 84.3 | 23.6 | 42.1 | 36.8 | 27.6 |
| M16 | 2.00 | 157 | 44.0 | 78.5 | 91.4 | 68.6 |
| M20 | 2.50 | 245 | 68.6 | 122.5 | 178.4 | 133.8 |
| M24 | 3.00 | 353 | 98.8 | 176.5 | 308.4 | 231.3 |
| M30 | 3.50 | 561 | 157.1 | 280.5 | 612.6 | 459.5 |
| M36 | 4.00 | 817 | 228.8 | 408.5 | 1070.6 | 802.9 |
Properties of ASTM F568 Grade 5.6 Bolt
Key properties that determine Grade 5.6 bolt strength, hardness, ductility, and performance.
Grade 4.6 Vs 5.6 Bolts
Both are unhardened carbon steel, Class 5.6 provides 25% more yield capacity, affecting material selection and cost.
Grade 4.6 Bolt
- Tensile strength 400 MPa minimum
- Yield strength 240 MPa minimum
- Proof stress 225 MPa
- Elongation 22 % minimum
- Hardness 120–220 HV
- Mating nut property class 4
Grade 5.6 Bolt
- Tensile strength 500 MPa minimum
- Yield strength 300 MPa minimum
- Proof stress 280 MPa
- Elongation 20 % minimum
- Hardness 155–220 HV
- Mating nut property class 5
IS 1367 Grade 5.6 Studs Applications
Where our class 5.6 output actually ends up, from foundation pockets to conveyor galleries.
Nut Bolt Grade 5.6 For America & Southeast Asia
We regularly ship to North American distributors and Southeast Asian assembly plants.
Toronto, CanadaChicago, USA
Monterrey, Mexico
Venezuela
Singapore
Cebu, Philippines
Penang, Malaysia
Vietnam
Thailand
Indonesia
Genoa, Italy
Rotterdam, NetherlandsGrade 5.6 Bolt Supplier In India – Certificate Released Before Loading
Domestic buyers see the test report and heat number before the truck is loaded, not a week later.
Grade 5.6 Fasteners Delivery Timeline
Choose the shipping route around your pour date, with certification packed alongside each shipment.
Ex-Stock Dispatch
Racked M6 to M36 sizes clear our Mumbai godown inside 24 to 72 hours
Sea Freight
FCL and LCL sailings run roughly 18 to 35 days port to port
Air Freight
Shutdown and breakdown quantities fly within 3 to 7 days
Country-Specific ETA
Name your discharge port and we confirm the next booking cut-off
Testing & Certification of HT Grade 5.6 Nuts
Each check below is run in our NABL ISO/IEC 17025 lab and recorded against the heat number on your certificate.
Grade 5.6 Bolt FAQs
The questions our grade desk answers most often before a class 5.6 order is released.
What is the tensile strength of Class 5.6 Stud Bolts?
Class 5.6 Stud Bolts has 500 MPa minimum tensile strength, 300 MPa yield strength, 280 MPa proof stress, and 20% minimum elongation.
What is the 5.6 Grade Bolt equivalent in other standards?
ISO 898-1, IS 1367, DIN 267-3, JIS B1051 & ASTM F568M, A307 Grade B and J429 Grade 2 are approximate analogues.
What sizes are Grade 5.6 Fasteners available in?
ISO 898-1 covers M5-M39; custom Class 5.6 sizes up to M64 and lengths up to 2000 mm are available.
Is ASTM F568 Grade 5.6 Bolt available in inch threads or only metric?
ASTM F568 Grade 5.6 covers metric coarse and fine threads, inch sizes follow equivalent ASTM/SAE grades.
Can HT Grade 5.6 Nuts be hot-dip galvanized?
Yes. HT Grade 5.6 Nuts is suitable for routine hot-dip galvanizing to ISO 10684 or ASTM A153, with threads adjusted for coating thickness.
What documentation ships with a Grade 5.6 Anchor Bolt export order?
EN 10204 3.1 MTC with heat, chemical and mechanical details; Type 3.2 and other certifications available on request.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
