Grade 12.9 Bolts Snapshot
Mortec At A Glance
Established
Since 2012 • 15+ yrs experience
Manufacturing Units
2 in-house units • Taloja & Mazgaon
Stockyard Area
8,850+ sq.ft • Ready-stock inventory
Certifications
ISO 9001:2015, PED • GST, IEC & MSME
Clientele
100+ clients • India & export markets
Export Reach
15+ countries • Europe, GCC & APAC
Testing Offered
Mechanical, hardness & dimensional • MTC EN 10204 2.1 & 3.1
Shipment Documents
Invoice, Packing List • COO, COI, MTC, BL & Lab Report
Table of Content
High Tensile Grade 12.9 Flange and Hex Bolt Manufacturer in India With Export-Grade Packaging, See Tensile Strength
When your bay or skid can't afford a fastener failure, Grade 12.9 is the property class engineers reach for. As a direct Grade 12.9 bolt manufacturer, we forge, thread and heat-treat every batch in-house, so what you order is exactly what leaves our Mumbai unit - no re-badged trading stock, no guesswork on the property class marking.
Buyers across the Middle East, Africa, Canada and Southeast Asia order from us because our ex-stock hex bolt and flange bolt range in M6 to M36 ships within 24 to 48 hours, complete with a mill test certificate and export-ready packing. Whether you need a Grade 12.9 M8 bolt for a light assembly or a Grade 12.9 M20 bolt for a structural joint, our in-house testing facility confirms hardness and proof load before your order is confirmed, not after it lands on site.
Grade 12.9 Bolt Material Specification
Get your quote direct from the manufacturer - no middlemen, MTC included with every dispatch. We export Grade 12.9 fasteners worldwide with full mill certification
Grade 12.9 Metric Bolt Size Range
- M6 to M36 ex-stock
- M1.6 to M64 to mill order
- Coarse & fine thread pitch
Grade 12.9 Hex Bolt & Drive Types
- Hex Bolt 12.9 Grade, Grade 12.9 Flange Bolt, Countersunk
- Socket (Allen) head on request
12.9 Grade Bolt Governing Standards
- ISO 898-1 Property Class 12.9
- ASTM F568 Grade 12.9 Bolt / ASTM F568M Grade 12.9 Bolt / IS 1367 Grade 12.9 Studs
DIN 12.9 Fasteners Dimensional Standards
- DIN 931, DIN 933, DIN 912
- ISO 4014, ISO 4017, ISO 4762
High Tensile Grade 12.9 Bolts Material & Temper
- Alloy steel, quenched & tempered
- Min. tempering temperature 425°C
Grade 12.9 Fasteners Testing & Documentation
- Hardness, proof load, tensile break
- MTC, dimensional report, TPI on request
ASTM F568 Grade 12.9 Screw & Ht Grade 12.9 Screws Surface Finish
- Black oxide, plain, zinc plated
- Yellow/blue zinc & Dacromet available
IS 1367 Grade 12.9 Nut Bolt
- Matching HT Grade 12.9 Nuts & washers
- Bagged, boxed or bulk export pack
ASTM F568M Grade 12.9 Anchor Bolt Manufacturing Origin
- Indian & European mills
- Origin certificate on request
Our most requested ex-stock sizes are Grade 12.9 M6, M8, M10 and M12 bolts. The larger M14–M24 range is popular for structural steel and heavy machinery joints
| Nominal Size | Coarse Pitch | Hex A/F (ISO 4014/17) | Head Height (approx.) |
|---|---|---|---|
| M6 | 1.00 | 10 | 4.00 |
| M8 | 1.25 | 13 | 5.50 |
| M10 | 1.50 | 16 | 7.00 |
| M12 | 1.75 | 18 | 8.00 |
| M14 | 2.00 | 21 | 9.00 |
| M16 | 2.00 | 24 | 10.00 |
| M18 | 2.50 | 27 | 12.00 |
| M20 | 2.50 | 30 | 13.00 |
| M22 | 2.50 | 34 | 14.00 |
| M24 | 3.00 | 36 | 15.00 |
| M27 | 3.00 | 41 | 17.00 |
| M30 | 3.50 | 46 | 18.70 |
| M33 | 3.50 | 50 | 21.00 |
| M36 | 4.00 | 55 | 22.50 |
Indicative values per ISO 4014/4017 hex bolt series. Fine-pitch and socket-head dimensions issued with your RFQ.
Grade 12.9 Bolts Manufacturer In Mumbai,
ready stock M6–M36, dispatch within 48 hours
Keep Class 12.9 Stud and Threaded Rod Ready for Immediate Dispatch With In-House Testing Facility
Grade 12.9 Bolt Manufacturing Standards
Every Grade 12.9 fastener is checked against these codes before dispatch. This includes IS 1367 Grade 12.9 studs for the domestic market
DIN 12.9 Bolts Types
We're a leading Grade 12.9 fasteners supplier in India. Our ex-stock inventory covers every common head type, from hex bolts to anchor bolts.
Grade 12.9 Hex Bolt
DIN 931/933 • M6–M36- Full or partial thread on shank
- Most-ordered structural fastener, 12.9 grade bolt
Grade 12.9 Flange Bolt
DIN 6921 • Serrated/Plain- Integral washer face, no loose washer
- Common on chassis & machinery joints
Ht Grade 12.9 Socket Head Cap Screws
DIN 912 / ISO 4762 • Allen Drive- Compact head for recessed bores
- Common in jigs, fixtures & machine tools
Class 12.9 Stud Bolts
Double-End • Custom Length- Threaded both ends, plain or waisted
- IS 1367 Grade 12.9 studs cut to your drawing length
High Tensile Class 12.9 Threaded Rod
Continuously Threaded • Cut Length- Full-length thread, cut-to-order
- Used with coupling nuts on tie-rods
Grade 12.9 Anchor Bolt
L/J-Type • Foundation Fixing- High preload for heavy base plates
- Cast-in or chemical-anchor styles
Grade 12.9 Fasteners Chemical Composition
ISO 898-1 requires a hardenable alloy steel, quenched and tempered above 425°C. Table shows the typical grade used (42CrMo4 / AISI 4140) - confirm exact chemistry on your MTC
Grade 12.9 Bolt Tensile & Yield Strength
MTC-backed, verified material properties per ISO 898-1 for property class 12.9 - covering tensile, yield and shear strength for design reference
Grade 12.9 Bolt Material Equivalent
Property Class 12.9 is referenced across every major fastener standard - use this table to cross-check your regional callout.
ASTM (USA)
- ASTM F568M Grade 12.9
- No direct inch-series SAE match
- ASTM A574 (socket screws)
DIN / EN (Germany)
- DIN EN ISO 898-1
- Property Class 12.9
- Formerly DIN 267 Part 3
JIS (Japan)
- JIS B1051 Strength Class 12.9
- JIS B1180 (Hex Bolt Dimension)
BS (United Kingdom)
- BS EN ISO 898-1
- Property Class 12.9
IS (India)
- IS 1367 Part 3
- Property Class 12.9
ISO (International)
- ISO 898-1 (base standard)
- ISO 4014 / 4017 (dimensions)
Your Grade 12.9 Bolt Partner Across The GCC
Ex-stock inventory and mill-order dispatch to buyers across the Gulf region.
Dubai, UAEAbu Dhabi, UAE
Riyadh, KSADammam, KSA
Doha, Qatar
Muscat, Oman
Kuwait City
Manama, BahrainASTM F568 Grade 12.9 Bolt Torque Chart
Indicative tightening torque for a lubricated Grade 12.9 fastener - actual values depend on lubrication and joint conditions. See M8–M24 torque below; confirm with your engineer for critical joints
| Size | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 |
|---|---|---|---|---|---|---|---|---|---|---|
| Torque (Nm) | 15 | 37 | 75 | 130 | 205 | 320 | 460 | 635 | 865 | 1090 |
These figures are for reference only and assume a lubricated thread and bearing surface - dry/as-received torque can run 20–30% higher. Request a joint-specific torque calculation with your RFQ.
Grade 12.9 Bolts, Ex-Stock & Ready To Ship Across Africa
Container-ready shipments for buyers across North, West, East and Southern Africa.
Durban, South AfricaJohannesburg, SA
Kampala, Uganda
Nairobi, KenyaLeading Grade 12.9 Bolts Manufacturer In India
enquiry quoted within 24 working hours
12.9 Grade Bolt vs Grade 10.9 vs Grade 8.8
The three most-specified metric property classes side by side - pick the lowest class that still meets your joint's design load.
Grade 8.8
- Tensile: 800 MPa min
- Yield: 640 MPa min
- Material: Medium carbon steel, Q&T
- Best For: General structural joints
Grade 10.9
- Tensile: 1040 MPa min
- Yield: 940 MPa min
- Material: Alloy steel, Q&T
- Best For: Flange & structural bolting
Grade 12.9
- Tensile: 1220 MPa min
- Yield: 1080 MPa min
- Material: Alloy steel, Q&T, higher hardenability
- Best For: High-load, weight-critical joints
DIN 12.9 Fasteners Head Markings
Check these three marks on the bolt head before install - they confirm property class and traceability on every 12.9 grade bolt we dispatch.
From Toronto To Manila - Grade 12.9 Bolts On Demand
Ex-stock supply lines serving North American, European and Southeast Asian buyers alike.
Toronto, Canada
MexicoUnited KingdomGermany
Netherlands
Italy
Turkey
Singapore
Malaysia
Thailand
Manila, Philippines
Indonesia
VietnamMumbaiAhmedabadBengaluruChennaiPuneGrade 12.9 Bolts Coatings
Coating choice affects corrosion life and embrittlement risk - confirm your finish before order placement
Grade 12.9 Bolts Supplier In India stocking hex, flange and socket head types
MTC-backed batches packed to withstand long transit and tropical port handling.
Grade 12.9 Bolt Manufacturing Process
Every bolt passes through four stages, from wire rod to a heat-stamped finished piece.
Cold/Hot Forging
Wire rod headed and shank formed under pressure.
Thread Rolling
Threads rolled after heat treatment to preserve strength.
Quench & Temper
Tempered above 425°C to reach class 12.9 properties.
Test & Mark
Hardness and dimensional check before head-stamping.
Order Turnaround By Shipping Mode
Dispatch begins the same day from our Mumbai unit once confirmed - choose your freight mode below.
Ex-Factory Dispatch
Stock orders leave within 24–48 hours of PO confirmation
Sea Freight
Economical for bulk orders, 2–5 weeks port to port
Air Freight
For urgent spares, 4–8 days door to door
Country-Specific ETA
Share your discharge port for an exact delivery window
Grade 12.9 Bolt Testing & Certification
Grade 12.9 Hex Bolt is available on request and recorded on your mill test certificate.
Hot Galvanized 12.9 Anchor Bolt Applications
These are the industries that specify Grade 12.9 fasteners and Grade 12.9 anchor bolts most often, and why.
Grade 12.9 Bolts Supply References
Grade 12.9 Bolts Exporter with EN 10204 3.1 certification and quick sea shipment
M20 Grade 12.9 Bolt - Heavy Equipment Assembly Line
Zinc plated, hardness & proof load tested, MTC 2.1.
Machinery Manufacturer, UAE
DUBAI, UAEM24 Grade 12.9 Anchor Bolt Set - Precast Foundation Package
Custom length, dimensional report, MTC 3.1.
Construction Contractor, South Africa
DURBAN, SOUTH AFRICAM12 Grade 12.9 Bolt - Tooling Fixture Order
Black oxide, batch hardness tested.
Tooling Supplier, Singapore
SINGAPOREM16 Grade 12.9 Stud Bolt - Wind Turbine Tower Section
Full traceability, third-party witnessed proof load.
Renewable Energy EPC, Canada
TORONTO, CANADATop Export Countries
UAE
Saudi Arabia
Qatar
Oman
Kuwait
Bahrain
South Africa
Uganda
Canada
United Kingdom
Singapore
Thailand
Malaysia
Indonesia
Vietnam
Have your size and quantity ready? Message us your requirement on WhatsApp for an instant ex-Mumbai price.
Grade 12.9 Bolt FAQs
Quick answers to the questions buyers ask us most before placing an order.
What is the tensile strength of High Tensile Grade 12.9 Bolts?
1220 MPa min tensile, 1080 MPa min yield, per ISO 898-1.
Is an ASTM F568M Grade 12.9 Bolt the same as SAE Grade 8?
No - metric ISO property class, not a direct SAE Grade 8 match.
Can you supply Hot Dip Galvanized Bolts Grade 12.9?
Not advised - embrittlement risk. Mechanical zinc or zinc flake instead.
Do you export Grade 12.9 Fasteners to the Middle East and Africa?
Yes - GCC, Africa, Europe & the Americas, fully documented.
Which Grade 12.9 Hex Bolt and Grade 12.9 Flange Bolt sizes are ex-stock?
M6 to M36 ex-stock, incl. Grade 12.9 M12 Bolt; above M36 on mill order.
Authorized Supplier For The Following Companies - Material At Reseller Price For Traders
